| Customization: | Available |
|---|---|
| Voltage: | 220V/110V |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 5200/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
AUTOMATIC AIR COIL WINDING MACHINE
| Size: | 1300*1050*1200mm |
| Weight: | 500KG |
| WIRE DIAMETER : | 0.1-1.2mm |
| COIL HEIGHT: | MAX 240MM |
| PROGRAM SETTING: | MAX 99 SETS |
| DRIVE SYSTEM | AC Motor |
| SPEED | 100-3200RPM |
| VOLTAGE | Single phase 220V |
| MAIN ACCESSORY: | 1. 8 nos winding head, the winding head length and angle can be adjusted. 2. along with a moveable wire worktable (8 nos wireframe + 8 nos wire bucket ). 3. 2 nos square former spindle:16X16X630 mm. 4. wire frame workable 900x780x800 mm |
| FEATURE: |
|
| SCOPE OF APPLICATION: | Suitable for washing machine motor, AC motor, pump motor, compressor motor, fan motor, etc |
Servo external stator winding machine
| Spindle number | 2 |
| Wire size range | 0.12-0.4mm |
| Work station | 2 station |
| The max stator OD | 200MM |
| Stator height | 8-45mm |
| Max speed | 0-3000RPM |
| Spindle motor | Single Phase 220v |
| Machine size | 1300×800×1400mm |
| Weight | 350kg |
(GW-PI20) Insulation paper insulation sheet automatic insertion machine (ceiling fan)
Specifications:
| Model | GW-PI20 |
| Stator slots | 8-36slots |
| Inserting speed | 0.5-1.0s/slot |
| Stator OD | 40-200MM |
| Stator height | 10-40mm |
| Folding wideth | 2-3.2mm |
| Machine size | 900×900×1000mm |
| Weight | 350kg |
| Size: | 1400*700*1700mm |
| Weight: | 400KG |
| STATOR OD: | Max 160mm |
| STATOR ID: | 30-100mm |
| STATOR HEIGHT: | 10-90mm,over 90mm is SPM |
| STATOR SLOTS | 8-36slots |
| OVERHANG HEIGHT | 10-35mm |
| LACING SPEED: | 0.5s/slot |
| VOLTAGE: | Single phase 220V |
| FUNCTION: | This machine is used for motor stator coil overhang cotton thread lacing |
| FEATURE: | 1. Through HMI setting machine speed, stator slots, lacing direction and lacing m mode. 2. This machine can all slot lacing and leap slot lacing. 3. A machine with tension arrangement, can adjust cotton thread lacing tension. 4. Lacing speed is fast and can be up to 220 times/minute. 5. After lacing the out looking is beautiful. |
| Size: | 1400*700*1700mm |
| Weight: | 650KG |
| STATOR OD: | Max 160mm |
| STATOR ID: | 30-100mm |
| STATOR HEIGHT: | 10-70mm,over 70mm is SPM |
| STATOR SLOTS : | 8-36slots |
| OVERHANG HEIGHT: | 10-35mm |
| LACING SPEED: | 0.5 s/slot |
| VOLTAGE: | Single phase 220V |
| FUNCTION: | The stator lacing machine is used for motor stator coll overhang cotton thread lacing |
| FEATURE: | 1. Through HMI setting machine speed, statorslots, lacing direction, and lacing mode. 2. This machine can all slot lacing and leap slot lacing. 3. Machine with tension arrangement, can adjust cotton thread lacing tension. 4. Lacing speed is fast, it can be up to 220 fimms/minute. 5. After lacing the out looking is beautiful. 6. Finish cotton thread lacinia for both sides at the same time. |
| Size: | 1700*800*1700mm |
| Weight: | 1050KG |
| STATOR OD: | Max 200mm |
| STATOR ID: | 25-100mm |
| STATOR HEIGHT: | 10-70mm,over 70mm is SPM |
| STATOR SLOTS : | 8-36slots |
| WIRE DIAMETER: | 0.09-0.75mm |
| SLOT FILL RATIO: | Copper ≤ 80%; CCA ≤ 75%; aluminium ≤ 70% |
| VOLTAGE: | 3 phase 380V |
| SUITABLE FOR: | Copper/ aluminium/ CCA |
| FUNCTION: | This machine is used for motor stator colls and wedge-paper automatic inserting. |
| SCOPE OF APPLICATION: | Suitable for washing machine motor, AC motor, pump motor, compressor motor, fan motor; etc |
| FEATURE: | 1. Automatically insert coils and wedge paper into the stator slot at the same time. 2. Through HMI setting parameters, automatically feeding wedge paper as per required length forming. cutting and pressing into the tooling wedge paper collector. 3. Machine body welding by steel plate stable 4. Change tooling easily and fast. |
| Size: | 1900*800*1400mm |
| Weight: | 600KG |
| ROTOR OD: | 20-62mm, Over 62mm is SPM |
| ROTOR ID: | 25-100mm |
| STATOR HEIGHT: | 10-70mm,over 70mm is SPM |
| STATOR SLOTS : | 8-36slots |
| WIRE DIAMETER: | 0.09-0.75mm |
| SLOT FILL RATIO: | Copper ≤ 80%; CCA ≤ 75%; aluminium ≤ 70% |
| VOLTAGE: | 3 phase 380V |
| SUITABLE FOR: | Copper/ aluminium/ CCA |
| FUNCTION: | This machine is used for motor stator colls and wedge paper automatic inserting. |
| SCOPE OF APPLICATION: | Suitable for washing machine motor, AC motor, pump motor, compressor motor, fan motor; etc |
| FEATURE: | 1. Automatically insert coils and wedge paper into the stator slot at the same time. 2. Through HMI setting parameters, automatically feeding wedge paper as per required length forming. cutting and pressing into the tooling wedge paper collector. 3. Machine body welding by steel plate stable 4. Change tooling easily and fast. |
| Size: | 1900*800*1400mm |
| Weight: | 450KG |
| ROTOR OD: | 25-80mm, |
| ROTOR HEIGHT: | 10-80mm |
| SHAFT LENGTH: | 50-350mm |
| MAX CUTTING THICKNESS : | 0.3mm |
| WORK STATION: | Single station |
| SPEED: | 600-700 nos/ hour |
| X SPINDLE STROKE | 120mm |
| Y SPINDLE STROKE: | 40mm |
| VOLTAGE: | 3phase 380V |
| FUNCTION: | Automatic operating, easy. Simple highly efficient, and saves labour. After turning rotor-concentricity is good, the rotor OD size is stable, and all-size turning is very accurate. The machine uses a high-tech oil pressure motor from Italy. The oil pump and hydraulic cylinder from Taiwan, ensure the machine works for a long time and is stable working. |
| SCOPE OF APPLICATION: | Suitable for middle and small motor rotor O.D rough turning purpose |
| FEATURE: | 1. Considering that customers have a lot of different size rotors, we use special designs for the machine construction, easy and fast for customers to change different size rotor tooling. 2. After turning, the rotor surface is smooth concentricity is good, and size accuracy is good. And also highly efficient. the finish speed is1-5 times more than the outer grinding machine |
| Size: | 1900*800*1400mm |
| Weight: | 450KG |
| ROTOR OD: | 25-80mm, |
| ROTOR HEIGHT: | 10-80mm |
| SHAFT LENGTH: | 50-350mm |
| MAX CUTTING THICKNESS : | 0.3mm |
| WORK STATION: | 2 station |
| SPEED: | 600-700 nos/ hour |
| X SPINDLE STROKE | 120mm |
| Y SPINDLE STROKE: | 40mm |
| VOLTAGE: | 3phase 380V |
| FUNCTION: | Automatic operating, easy. Simple highly efficient, save labour. After turning rotor-concentricity is good, the rotor od size is stable, and all size turning is very accurate. The machine uses a high-tech oil-pressure motor from Italy. The oil pump and hydraulic cylinder from Taiwan, ensure the machine works for a long time and is stable working. |
| SCOPE OF APPLICATION: | Suitable for middle and small motor rotor O.D rough turning purpose |
| FEATURE: | 1. Considering that customers have a lot of different size rotors, we use special designs for the machine construction, easy and fast for customers to change different size rotor tooling. 2. After turning, the rotor surface is smooth concentricity is good, and size accuracy is good. And also highly efficient. the finish speed is1-5 times more than the outer grinding machine |
| Size: | 900*1000*2000mm |
| Weight: | 400KG |
| STATOR OD: | 35-200mm |
| STATOR ID: | 20-150mm |
| STATOR HEIGHT: | 10-120mm, over 120mm is SPM |
| SPEED : | 8s/pcs |
| VOLTAGE: | 3 phase 380V |
| FUNCTION: | After the coils are inserted into the stator slot, use this machine to make the coil's overhang height, id od like to request sizes, so that easy for cotton thread lacina to work. |
| SCOPE OF APPLICATION: | Suitable for washing machine motor AC motor, pump motor, compressor motor .fanmatofetc |
| FEATURE: | 1. After pressing the start button the machine starts forming work automatically. safe fast. 2. Machinefit with safety switch. ensure for people's safety, 3. Toollna adjustment, change is easy and fast. |
| Size: | 900*1000*2000mm |
| Weight: | 400KG |
| SHAFT OD: | 35-200mm |
| SHAFT HEIGHT: | 10-300mm |
| POWER : | 3.75kw |
| VOLTAGE: | 3 phase 380V |
| FUNCTION: | This machine is semi-automatic type. through hydraulic cylinder put the shaft into the rotor, very tight. single workstation type and double workstation type available. |
| SCOPE OF APPLICATION: | Suitable for different types of shaft pressing into the rotor, etc |
| FEATURE: | 1. After pressing the start button, the machine starts forming work automatically, safely, and quickly. 2. Machine fit with safety switch, ensuring people's safety. 3. Tooling adjustment, change is easy and fast. |
| Size: | 700*600*2000mm |
| Weight: | 380KG |
| STATOR OD: | 35-200mm |
| STATOR ID: | 20-150mm |
| STATOR HEIGHT: | 10-120mm,over 120mm is SPM |
| SPEED : | 5s/pcs |
| VOLTAGE: | 3 phase 380V |
| FUNCTION: | After coil lacing work use this machine to make coil overhang height .id, od achive to request final size. then go for varnish work. |
| SCOPE OF APPLICATION: | Suitable for washing machine motor.AC motor .pump motor, compressor motor .fan motor, etc |
| FEATURE: | 1: Use a cil hydraulic system to ensure enough pressure. 2. After pressing the start button. the machine starts forming work automatically, safely, and fast. 3. Machine fit with safety switch. ensure people's safety. 4. Tooling adjustment, and change is easy and fast. |
| FUNCTION: | The machine has 12 stations. It is used for pressing the outer winding stator into the core |
Grewin Industrial Group Co., Ltd. was established in 1993, is a research and development, production, sales, and service in one of the mechanical and electrical production equipment enterprises.
PRE-SALE:
The customer service department of Grewin Group consists of specialist engineers who are experienced in all aspects of coil winding technology, and who can answer and provide innovative solutions to difficult coil winding problems in the fastest time. We can quote
the price within 1 day.
IN SALE:
For us, We can deliver machines in a maximum of 10 days.
Sales are not selling products, and then going away. Our aim is to serve our customers wholeheartedly. To this end, we offer our clients free advice. In the communication with customers, we not only have an in-depth understanding of the actual needs of our
customers, but also provide professional advice, including the choice of accessories types and machines' consumable parts, etc.
AFTER-SALE:
We provide remote services to our customers through video instruction and by phone 24 hours, allowing clients to purchase products without any worries. We can provide a 1-year warranty and provide you free mainframe.
){kind=link}