| Connectors: | USB |
|---|---|
| Test Mode: | Instant Test |
| Usage: | Network Cable Tester, Audio Cable Tester, Coaxial Cable Tester, Digital Cable Tester |
| Samples: |
|---|
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Grewin china 50Hz/60Hz,250Hz/300Hz RCI-600P Electric Cable Fault location
Product Description
1.1 FUNCTION FEATHER:
l Compass display: to display pipe position directly.
l Left/right arrow indication: use the left/right arrow to indicate the pipe position when route tracing.
l Right/wrong indication: real-time test the pipe current direction to indicate tracing result and avoid the nearby lines interference.
l Real-time depth measure and current measure.
l History curve display: to display the signal variation directly.
l Cable Identification: Clamp (optional) identification and sensor identification. Clamp identification can precisely gives accurate result. sensor (optional) identification could be used when the Clamp identification is not applicable.
l Grounding fault location: Use the A frame (optional) to pinpoint the pipe insulation damaged points against the ground. No need to do zero set and the arrow will point to the fault point direction.
l Digitization high accuracy sampling and processing,narrow receiving pass band to rise the anti-interference capability and suppress power interference and harmonic interference from nearby running cable and pipe.
l Multiple locating frequency: active detection and passive detection.
l Multiple signal output mode: Direct connection output, Clamp Coupling input, Radiation output.
l Big capacity Li-on batteries series,support auto power off when low battery or long time no operation
l Solid case and light weight easy to carry
1.2 SPECIFICATION:
1.2.1 Transmitter:
l Output: Direct Connection output, Clamp Coupling Output (optional), Radiation output.
l Output Frequency:
l 640Hz (complex frequency), 1280Hz (complex frequency), 10kHz, 33kHz, 83kHz.
l Output power: max. 10W, 10 levels adjustable, auto impedance matching.
l Direct connection voltage: max. 150Vpp.
l Overload and short circuit protection.
l HMI: 128X64 LCD.
l Power supply: 4 X built-in 18650 Li-on batteries, standard 7.4V, 6.8Ah.
1.2.2 Receiver:
l Input: Internal receiving loop, Clamp (optional), sensor (optional),fault locating A Frame (optional).
l Receiving frequency:
- Active frequency: 640Hz,1280Hz,10kHz,33kHz,83kHz
- Power frequency: 50Hz/60Hz,250Hz/300Hz
- Radiation frequency passive frequency: center frequency 10kHz, 33kHz, 83kHz
l Pipe detection mode: wide peak method,narrow peak method,valley method
l Cable identification mode: Receiving Clamp (optional) intelligent identification and sensor (optional) identification
l HMI: 320X240 LCD
l Built-in battery: 2 X 18650 Li-on batteries, standard 7.4V,3.4Ah
1.2.3 Other:
l Volume: transmitter 270x220x85mm,receiver 700x270x120mm
l Weight: transmitter 2.2kgs, receiver 2.2kgs
l Charger: input AC 100~240V,50/60Hz,output DC8.4V,2A
l Temperature: -10-40ºC,humidity 5-90%,elevation <4500m
Contact Information:
Alice
Tianjin Grewin Technology Co.,Ltd.
Website:transformer.en.made-in-china.com
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}