Rci 1200 Integrated Cable Fault Tester

• Model Number: Rci 1200
• Transmitting Power: 3.5W
• Receiving Frequency: 1kHz
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: RCI 1200
• Supply Power: Built-in Li-ion Battery Pack, Nominal Voltage 7.4V
• Distance Measurement Range: 30km
• Voltage of Low Voltage Impulse: 30V
• Blind Zone: 2m
• Gain of Signal Channel: 80dB
• Main Unit 1200m: 320*240 LCD
• Weight: 1.5kg M/T
• Transport Package: Standard Export Packing
• Specification: 270*220*80mm M/T
• Trademark: Grewin
• Origin: China
• HS Code: 9028901000
• Production Capacity: 50000PCS/Year

Product Description

RCI 1200 Integrated Cable Fault Tester

The RCI-1200 Integrated Power Cable Fault Tester is an intelligent power cable fault tester. 
It has integrated functions as:

1. Fault locating
2. Pin-pointing
3. Basic route tracing 

RCI-1200 includes two main devices and the accessories

The function of the two devices:

1. RCI-1200 M Integrated Power Cable Fault Tester

• Low voltage impulse fault distance testing
• Impulse current fault distance testing
• Audio magnetic synchronous pin-pointing
• Route tracing

1. RCI-1200T Route Tracing Signal Generator

• Transmit signal for route tracing

Compared with the traditional single functional device, the RCI-1200 is portable with small size and low weight. It is an upgrade device in locating area. 


RCI 1200 Integrated Cable Fault Tester Function Introduction:

1. Full-featured:

1. Low voltage impulse fault distance testing
2. Impulse current fault distance testing
3. Audio magnetic synchronous pin-pointing
4. Route tracing

 

1. Fault distance locating:

1. Low voltage impulse method: apply to the distance measurement of low resistance fault, short circuit and open circuit fault
2. Impulse current method: apply to the distance measurement of high resistance fault, breakdown fault with current coupler for signal sampling.

 

1. Pin-pointing:

1. Audio and magnetic synchronously receiving with high anti-interference capability 
2. Audio and magnetic signal waveform displaying to distinguish the signal and noise easily
3. Cursor test audio magnetic delay to display accurate fault point 
4. Route tracing while pinpointing according the initial polarity of magnetic waveform

 

1. Route tracing:

1. Signal generator:

• High capacity lithium-ion battery
• Full-automatic power matching and protection 
• High-power output

1. Peak and null method for route tracing
2. Signal amplitude display
3. 80% method and 45% method for depth detecting

 

1. Big LCD screen,4.3",320*240
2. SD card storage, easy to import to the computer
3. High capacity lithium-ion battery matched with quick charger
4. Power supply management to reduce the consumption. Auto power off in 15 min. without operation.
5. Auto power off when low battery lever to protect the battery.
6. Integrated design and small size, easy to carry.

 

RCI 1200 Integrated Cable Fault Tester Tech.

Fault distance locating
Distance measurement mode		Low voltage impulse Impulse current
Sampling frequency		100MHz
Resolution Ratio		Low voltage impulse:1m Impulse current:4m
Voltage of low voltage impulse		30V
Distance measurement range		30km
Blind zone		2m
Magnetic sound synchronization pin-pointing:
Audio signal transmission band		Mid-frequency 400Hz ,bandwidth 200Hz.
Gain of signal channel		80dB
Accuracy of pin-pointing		0.1m
Route tracing:
(M)Receiving frequency		1kHz
(M)Gain		80dB
Generator for route tracing:
(T)Transmitting frequency		1kHz
(T)Transmitting power		≥3.5W
Output		Open circuit voltage≥100Vp-p Short circuit voltage ≥300mA Auto matching according the actual loading Auto short circuit protection
Power supply:
Battery		built-in Li-ion battery pack, nominal voltage 7.4V,Capacity 3000mAH
Power consumption		RCI-1200M 400mA ,RCI-1200T 500mA
Charger		Input AC100-240V, 50/60Hz; output 8.4V, DC 1A
Charge time		<4 hours
Display
Main unit 1200M		320*240 LCD
Generator		Meter
Other
Volume		270*220*80mm  M/T
Weight		1.5kg M/T
Working condition
Tem.		-10ºC-40ºC
Humidity		5-90%RH
Elevation		<4500m

Basic operation

1. Basic steps:

1. Fault judgment
2. Fault distance testing
3. Route tracing
4. Pin-pointing

1. Fault judgment and test method chosen

1. When cable fault appeared, first determine the fault character as below:

• Test the phase to phase and phase-earth insulation resistance of one end of the cable by megger. If the result is zero, please use the multimeter to test the resistance.
• If the insulation resistance is very high but insulation is normal, please check whether open circuit fault exist. Here user can make three phases short circuit to the earth and test on the other end to distinguish.
• Fault character distinguish and test method form

 

No	Fault	Fault form	Distance test method	Pin-pointing method
1	Low resistance	Megger:0 Multimeter:< 200Ω	Low voltage impulse	Audio-frequency(optional)
				Audio magnetic synchronous
2	Open circuit	Conductor disconnection		Audio magnetic synchronous
3	High resistance	Megger:>0 Or: Megger:0 Multimeter:≥ 200Ω	Impulse current
4	Breakdown	Megger:insulation normal Withstand voltage test:no

Remark: 

1. The gray part in the form means that, for these functions, extra matched high voltage generator is needed.
2. Audio-frequency method to pinpoint the low resistance is optional. This need the matched CD-1200T route tracing signal generator.

Device introduction
1. Main unit and accessories
 

1. RCI-1200M Integrated power cable fault tester

• Function and accessories:

Low voltage impulse distance testing accessories: Low voltage impulse test line
Impulse current distance testing accessories: Impulse current coupler
Audio magnetic synchronous pin-pointing accessories: Pin-pointing sensor, earphone
Route tracing accessories: route sensor, earphone
 

1. RCI-1200T route tracing signal generator

• Signal generator for route tracing. Accessories: output line, earth stake

 

1. Charger for RCI-1200T/M

RCI-1200M Integrated power cable fault tester

 

1. Structure:

1. Function introduction:

•     Press 2 sec. to turn on/off device
•     Press to open/close the backlight
• Memo: Save current waveform
• Recall: recall the history waveform from the SD card
• Copy: Copy current waveform for comparing
• Both: Compare the current waveform with the copy waveform 
•           Move the cursor
• Locate/OK: Locate: auto cursor moving and fault locating

            OK: Confirm when some operation

•           When normal test, waveform zoom out/in

          When recall the saved waveforms, press to choose waveform 

• Mag. gain+/- :Adjust the synchronous magnetic signal gain under the pin-pointing mode
• Range+/-:change the current test range
•      Cursor switch: switch the solid cursor and the dotted cursor
•  VOP+/-:Adjust the cable pulse velocity
•  Main gain+/-: Adjust the gain of distance testing, audio gain of pinpointing and the gain of route signal.  
• Mode: Choose working mode 
• Indicator light on the right corner: indicate the different working modes including low voltage impulse ,impulse current, route tracing and pin-pointing. 
• Test: Under the low voltage mode, press for one testing. Under the impulse current mode, press one time to waiting for triggering. Invalid under the pin-pointing/route tracing modes.
• Signal indicator light: Under the low voltage mode, flash when test. Flash one time when triggering under the impulse current mode. Same as under the pin-pointing mode. Invalid when route tracing mode.

 

1. Interface:

• Low voltage interface: connect with the low voltage impulse testing line
• Impulse current interface: connect with the impulse current coupler
• Route tracing interface: connect with the route sensor
• Pin-pointing interface: connect with the pin-pointing sensor
• SD card: insert a SD card when need to save the waveforms. Press again to popup 
• Earphone: on the side of the main unit, to connect earphone for audio monitoring
• Charge port: on the side of the main unit, to connect the charger for build-in battery 

RCI-1200T route tracing signal generator

 

1. Structure:

 

1. Function introduction:

• Meter: display the output current, the full amplitude is 500mA

    Press batt. test to display the battery power level. Pointer in green area means normal while yellow means battery under voltage, but still could work for about one hour.If the pointer can't reach the yellow area, it means too low battery and need to charge.

•     Press for 2 sec. to turn on/off the device

• Batt.test: Press to test the battery level. Workable both device open or close   
• Power indicator: indicate the battery level. Bright when normal, shine when low voltage and off when too low battery.
• Signal indicator: display the signal output condition
• Charge port: on the side of the generator to connect the charger of built-in battery

RCI 1200 Integrated Cable Fault Tester Product:






Certificate:




Company Introduce:
Tianjin Grewin Technology Co.,Ltd have twenty years producing experience, located in Tianjin , China, our company have professional design term, advanced technology and equipment, especially pay great attention to its business philosophy "Quality and Honesty First". Grewin is specialized in the design and manufacture of  intelligent power meter and testing device, such as Three/single Phase Multi function Meter, Power Monitoring device,Intelligent Pipe Locator,Route tracing/Cable identification/depth measurement/grounding fault location and so on;especially the EPM and TPM product got inland and over sea's clients praise, and established OEM or ODM relationship. Our products have passed and obtained ISO9001 certificate ,CE certificate,SGS approval, and IEC report. We have developed good cooperative relationship with valued customers around the word, have first class product quality and one basket value-added after sales service along with the fast efficient solution. Grewin has won its brand in word wide.


 
Contact Information:

Alice Lee
TIANJIN GREWIN TECHNOLOGY CO.,LTD
Add:Meinian Plaza.No .16 Dongting Road,Hexi Distr,Tianjin,China .
Tel: [phone]
 
Web:transformer.en.made-in-china.com 
 
Mobile:[phone]