Subsurface Pipe and Cable Fault Test Equipment for Cable Line Tester

• Customization: Available
• Connectors: Coaxial BNC
• Test Mode: Instant Test
• Model NO.: RCI-601P
• Test Region: Forming Cable
• Cable Type: Shielded
• Certification: CE, FCC, RoHS
• Customized: Customized
• Color: Orange
• Output: Direct Connection Output
• Output Frequency: 640Hz, 1280Hz, 10kHz, 33kHz, 83kHz
• Output Power: Max. 12W
• Direct Connection Voltage: Max. 150vpp
• HMI: 128X64 LCD
• Power Supply: 4 X Built-in 18650 Li-on Batteries
• Volume1: Transmitter 270X220X85mm
• Volume2: Receiver 700X270X120mm
• Weight1: Transmitter 2.2kgs
• Weight2: Receiver 2.2kgs
• Charger: Input AC 100~240V 50/60Hz
• Charger2: Output DC8.4V, 2A
• Transport Package: Export Standard Carton or Customize Strong Pallet
• Specification: CE
• Trademark: Grewin 3 Phase Toroidal Transformer
• Origin: China
• HS Code: 85043190
• Production Capacity: 500 Sets

Product Description

Product Description :
10kHz-197kHz Underground Cable Tester  Fault Pipe Locator for Metallic Pipe Route Tracing and Identification
1.Introduction
 is a high performance underground metallic pipe locating system.It consists a transmitter and a receiver, can be used to do route tracing, pipe exploration and depth measurement of the underground cables and metallic pipes.It can also be used to identify target cable from a bunch of cables,locate the pipe insulation damage and part type cable fault.  

Click more details :
   

2.Product Pictures






   

                                                 
3.Function features:

Compass display: to display pipe position directly.

Left/right arrow indication: use the left/right arrow to indicate the pipe position when route tracing.

Right/wrong indication: real-time test the pipe current direction to indicate tracing result and avoid the nearby lines interference.

Real-time depth measure and current measure.

History curve display: to display the signal variation directly.

Cable Identification: Clamp (optional) identification and sensor identification. Clamp identification can precisely gives accurate result. sensor (optional) identification could be used when the Clamp identification is not applicable.

Grounding fault location: Use the A frame (optional) to pinpoint the pipe insulation damaged points against the ground. No need to do zero set and the arrow will point to the fault point direction.

Digitization high accuracy sampling and processing,narrow receiving pass band to rise the anti-interference capability and suppress power interference and harmonic interference from nearby running cable and pipe.

Multiple locating frequency: active detection and passive detection.

Multiple signal output mode: Direct connection output, Clamp Coupling input, Radiation output.

Big capacity Li-on batteries series,support auto power off when low battery or long time no operation

Solid case and light weight easy to carry
4.SPECIFICATION

 Transmitter:

Output: Direct Connection output, Clamp Coupling Output (optional), Radiation output. 

Output Frequency:

640Hz (complex frequency), 1280Hz (complex frequency), 10kHz, 33kHz, 83kHz.197khz

Output power: max. 10W, 10 levels adjustable, auto impedance matching.

Direct connection voltage: max. 150Vpp.

Overload and short circuit protection.

HMI: 128X64 LCD.

Power supply: 4 X built-in 18650 Li-on batteries, standard 7.4V, 6.8Ah. 

 Receiver:

Input: Internal receiving loop, Clamp (optional), sensor (optional),fault locating A Frame (optional).

Receiving frequency: 

      - Active frequency: 640Hz,1280Hz,10kHz,33kHz,83kHz 197KHZ
      - Power frequency: 50Hz/60Hz,250Hz/300Hz
      - Radiation frequency passive frequency: center frequency 10kHz, 33kHz, 83kHz  

Pipe detection mode: wide peak method,narrow peak method,valley method

Cable identification mode: Receiving Clamp (optional) intelligent identification and sensor (optional) identification

HMI: 320X240 LCD

Built-in battery: 2 X 18650 Li-on batteries, standard 7.4V,3.4Ah

Other:

Volume: transmitter 270x220x85mm,receiver 700x270x120mm

Weight: transmitter 2.2kgs, receiver 2.2kgs 
Charger: input AC 100~240V,50/60Hz,output DC8.4V,2A

Temperature: -10-40ºC,humidity 5-90%,elevation <4500m


Company introduction


1.certification
We have passed ISO9001:2015,CE,SGS approval and IEC report




 Tianjin Grewin is concentrating on power instruments and locators  for 24 Years and complianted by ISO9001:2015,CB,IEC CB,CE etc.We're always pay great attention to its business philosophy "Quality and Honesty First"windely used in communications,electronics,meters,industrial control,medical equipments and other fields.We are also a provider of power meters and instruments locators. 85% of its products exported to America, Europe, and Asia etc.We sincerely invite you to join us to create a bright future.

3.Terms of Shipment:
Within 10 working days after received related prepayment or L/C.

4.Payment terms:
(1)T/T 100% or 50% deposit by T/T in advance, balance amount to be paid 7 days before
delivery.
(2) By irrevocable L/C at sight, to be issued immediately against confirmed order.
(3)Payment by T/T, if order amount is less than USD 20,000.

5.Warranty:
(1)We provide 1 year warranty.
(2)If the product is defective, please notify us within 3 days of delivery.
(3)All products must be returned on their original condition, in order to qualify for a refund or exchange of goods

6.Why choose us?
Quality and honest first!
A. Flexible service for diffierent transformers with high efficiency performance.
B. Over 40 years experience of transformer designing and producing.
C.100% test of every single product we produce from incoming material checking.
D. UL, CE, ISO9001:2008
E. We offer custom-made transformers, OEM and ODM are welcome
F. We deliver the quality you expect at consistently competitive prices
G.Transformer quality lifetime:10 Years.
H.Specialty Sales service:5 -10 Years

7.Flow chart of trading activities:

NO	Step	Days need
1	Request for quotation	1 day
2	Making quotations	1 day
3	Offer and counter offer	3 days
4	Sending and receiving samples	3-10 days
5	Sample confirmation	3 days
6	Placing a firm order	1 day
7	Paying and receiving the down payment	1-4 day
8	Factory production & Quality inspection	15-20 days
9	Paying and receiving the balance	4 days
10	Delivery of goods	1 days

8.contact


Tianjin Grewin Technology Co.,Ltd. 
 
Web:transformer.en.made-in-china.com 
Address: 2# MeiNian Plaza No.16 DongTing Road,Hexi Distr,300222,Tianjin China.