| Customization: | Available |
|---|---|
| Voltage: | 220V |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
GWL-815C Semicircular Winding Machine
SPECIFICATION
| Wire diameter | 0.5-1.6mm | Max.winding speed | 300rpm |
| Max.final coil.O.D | Φ50-200mm | Magazine width | 3-10mm (optional) |
| Min.final coil.I.D | Φ20mm | Supply voltage | AC 220V(50Hz) |
| Max.final coil height | 60mm | Mechanical dimensions | 650*500*700mm |
| Controller storage capacity Programs | 50*20 set | Wight | 100kg |
FEATURES:
1. It adopts full-tooth transmission, with the characteristics of low running noise, fast product clamping, large suitable winding diameter, compact and beautiful wire arrangement, and is often used to wind the secondary coil of transformers and other products with high requirements such as mutual inductors.
2. It is suitable for winding a variety of wires, such as enameled copper wire, enameled aluminum wire, steel wire, nylon wire, etc., suitable for coil processing of products in various industries
3. The machine head uses synchronous belt transmission, which has the characteristics of low running noise, long life and maintenance-free
4. The maximum winding speed can be set at will according to the wire diameter and product characteristics
5. Automatically rotate the wire arrangement function when arranging the wire Yes, when making transformer products with more turns, the lead position is reserved
6. The maximum speed of wire storage and winding can be adjusted separately, which significantly improves production efficiency when winding small wire diameter products and the winding speed cannot be too fast
7. Multiple wire storage and multiple winding can be set. For products with more turns that cannot be stored enough at one time, or products with multiple windings but different wire diameters, winding can be completed at one time
8. The wire arrangement density (speed) can be automatically changed when running different programs. When winding products with multiple taps but different turns and the same wire arrangement angle/requirements, it can be automatically completed
ADVANTAGES:
High production efficiency, increase winding efficiency by adjustment of suitable brake tension,
Each wiring part guarantee no wire damage.
Parts highly optimized and universal for general use, Easy maintenance
The technicians are experienced
Free replacement of mainframe accessories
The technical staff is experienced for up to 5 years
Enquiries can be quoted one day service
| Equipment model |
GWL-6200 |
| Winding mode | Gear type |
| Finally complete the outside diameter | 60-120 |
| Minimum finished inside diameter | 35 |
| Maximum completion height | 80 |
| Suitable winding diameter range | 0.2-0.7 |
| Diameter of wire storage ring | 195 |
| Width of storage ring | 9-12 |
| Maximum speed | 800 RPM |
| Operating voltage | 220V/50HZ |
| Overall dimension | 500x600x700 |
| Weight | 90KG |
Features:
1.Toroid Coil Winder Machine feature high quality,easy to operate.
2.Automatic transformer winding machineLock gap shuttles,with polished sliders,gentle on wire insulation.
3.Coil transformer winding machine is ability to control winding speed.
GWLA-0319 Gear type middle speed copper wire toroidal coil winder
| Equipment model |
GWLA-0319 |
| Winding mode | Gear type |
| Finally complete the outside diameter | 60-200 |
| Minimum finished inside diameter | 25 |
| Maximum completion height | 80 |
Wire size |
0.5-1.6 |
| Diameter of magazine | 250 |
| Width of magazine | 3-8 |
| Depth of storage ring | 10/12/16 |
| Maximum speed | 230 RPM |
| Operating voltage | 220V/50HZ |
| Overall dimension | 500x600x750 |
Features:
1.Brake tension adjustable, Good settlement for large outer diameter, small inner diameter,transformer coil winder heavy wire coils.
2.Current transfromer coil winding machine with high production efficiency, increase winding efficiency by adjustment of suitable brake tension
3.It adopts the latest microcomputer full Chinese liquid crystal display controller, which has practical functions
GWL-0519 Gear type Current Transformer Winding Machine
| Wire diameter | 0.7-2.0mm | Max.winding speed | 200rpm |
| Max.final coil.O.D | φ60-250mm | Magazine width | 4-18mm (optional) standard 8mm |
| Min.final coil.I.D | Φ40 | Supply voltage | AC 220V(50Hz) |
| Max.finalcoil height | 90 | Mechanical dimensions | 650*500*700mm |
| Controller storage capacity Programs | 50*20 set | Wight | 120kg |
Features:
1.High quality auto transformer coil winder guarantee no wire damage.
2.Parts highly optimized and universal for general use, Easy maintenance
3.Enquiries can be quoted one day service
GWL-815 Gear type high quality coil winding machine for toroidal transformer
| Wire diameter | 0.3-1.6mm | Max.winding speed | 300rpm |
| Max.final coil.O.D | Φ50-200mm | Magazine width | 3-10mm (optional) |
| Min.final coil.I.D | Φ20mm | Supply voltage | AC 220V(50Hz) |
| Max.final coil height | 60mm | Mechanical dimensions | 650*500*700mm |
| Controller storage capacity Programs | 50*20 set | Wight | 100kg |
Features:
1.Accurately wire and tape spacing by adjustable.
2.Toroid Digital Transformer Winding Machine can easily exchangeable magazines secure maximum flexbility.
3.Extremely powerful,maintenance free AC motors for main drive and core rotation.
GWL-0619 Big gear high stability floor type winding machine for inductor
| Equipment model |
GWL-0619 |
| Winding mode | Gear type |
| Max.Final outer diameter | 130-450 |
| Mini final inside diameter | 70 |
| Max Final height | 220 |
| Wire diameter | 1.0-4.0 |
| Perimeter of magazine | 1200 |
| Width of magazine | 10-30(Optional) |
| Max winding speed | 120 rpm/min |
Features:
1.Floor type winding machine Complete range of articles, large range of wire diameter, Multipurpose
2.Big toroidal transformer winder machine with good compatibility, parts are interchangeable
3.High stability, part quality guarantee
GWLJ-0519 Gear type Rectangle transformer coil winding machine
| Wire size | 0.7-2.0mm(Single enamelled copper wire, multi-wire winding, the combined strength does not exceed the maximum value) |
| Finish the outer length/width | 60-300mm (Please note: 60-300mm does not mean such a wide range directly, but refers to adjustment by adjusting some installed parts. If the maximum 300mm is selected, products smaller than 150mm cannot be processed; on the contrary, if the product is selected to be suitable for small products, it cannot be processed. Products larger than 150mm.) |
| Minimum the inner length/width | 45mm(Length is greater than 45mm Width is greater than 45mm) |
| Maximum finished height | 60mm |
| Magazine width | 4-18mm(Optional)Standard configuration (8mm) |
| Magazine perimeter | 720mm |
| Max winding speed | 250rpm/min |
| Controller storage capacity Programs | 50*20set (1000 running programs) |
| Weight | 120KG |
| Dimension | 650*500*700mm |
Features:
1.Rectangular Coil Winding Machine are advanced,strongly built workhorses capable of winding light as well as heavy wire without insulation damage.
2.Copper wire Rectangular winder extremely powerful,maintenance free AC motors for main drive and core rotation.
3.Easily exchangeable magazines secure maximum flexibility.
GWV-12A Servo motor PLC contorller Toroidal Transformer Winding machine
| Wire size | 0.15-2.36mm |
| Minimum finish inner diameter | 25mm |
| Maximum completion height | 100mm |
| Maximum finish outer diameter | 25-300mm |
| Max speed | 150rpm |
| Tape Magazine diameter | 220mm |
GW-29T PLC contorller Toroidal Transformer coil Winding machine with Servo motor
| Wire size | 0.2-1.6mm |
| Minimum finish inner diameter | 17mm |
| Maximum completion height | 70mm |
| Maximum finish outer diameter | 50-150mm |
| Max speed | 240rpm |
| Tape Magazine diameter | 210mm |
GWV10-PLC Automatic Micro core Servo motorToroidal Coil Winding Machine
| Wire size | 0.05-0.32mm |
| Minimum finish inner diameter | 1.8mm |
| Maximum completion height | 10mm |
| Maximum finish outer diameter | 5-14mm |
| Max speed | 1500rpm |
| Magazine inner diameter | 60mm |
Features:
1.Actual input of the inner and outer diameter, wire diameter and wire spacing values of the magnetic ring without repeated debugging is required.
2. Can be completed automatically: dense winding, sparse winding, multi-layer winding, forward and reverse winding, segmented winding, multi-thread parallel winding, etc.winding method.
3.The main motor is a 400-watt servo, with constant torque and precise rotation, and the magnetic core clamp is driven by a stepper motor neat and beautiful wiring.
GW-7004 New design servo motor Intelligent fully automatic toroidal coil winding machine
| 1 | Model |
GW-7004 |
| 2 | power supply |
220V/110V 50/60HZ |
| 3 | Air pressure |
0.6Kpa-0.8Kpa |
| 4 | Maximum wire diameter |
0.2mm |
| 5 | Minimum wire diameter |
0.05mm |
| 6 | Maximum finished outer diameter |
40mm |
| 7 | Minimum finished inner diameter |
6mm |
| 8 | Maximum finished product height |
20mm |
| 9 | Line spacing control |
Programming control |
| 10 | Sectional winding control |
Programming control |
| 11 | Cumulative winding control |
Programming control |
| 12 | Cable motor |
Hybrid stepping motor |
| 13 | Main motor |
servo motor |
| 14 | Winding speed |
Adjustable,the fastest equipment is1400rpm |
| 15 | physical dimension |
900mm*900mm*1500mm |
| 16 | Weight | 75KG |
Features:
1.winding speed:7004:1300rpm 7005:1200rpm
2.Output:About 20PCS/hour if the winding turn is 3000 turns.
3.Main motor: servo motor make the wiring more precise
4.PLC controller
5.This machine is very easy to operate,one worker can watch over 30-50 machines at same time in china.
6.Three winding mode:Clockwise mode CMC mode Back and forth mode.
GW-F60 Toroidal Transformer Winding machine
| Model: | GW-F60 |
| wire diameter range: | 0.5-3.5MM (single wire:3mm,double wire:2.8mm*2) |
| magazine diameter: | 490MM |
| Max. finished O.D.: | 100-3500MM |
| Min. finished I.D.: | 45 |
| Max. finished height: | 200 |
| Max. Winding Speed: | 80 |
| Winding head | GW444 |
Brief technical description:
The GW-F60 chassis is a floor-standing heavy-duty chassis specially designed for large magnetic cores and thick wire diameters. It has stronger power and a wider range of adaptability. It uses PLC control and a touch screen display interface, and can be applied to a variety of machines. heads and clamps.
This product is composed of standard components, including: electronic controller, machine head servo motor, clamp stepper motor (servo can also be
control). Users can easily edit text commands into the controller software.
GWP-F60 is mainly used for tape wrapping and winding of some difficult product specifications.
Technical Parameters:
1.Controller:
PLC controller
2.show:
7-inch touch screen monitor
3.Program capacity:
30 programs Each program contains 30 segments
4.program:
User edit text command Independent operation menu
5.Data storage and output:
PC interface Software update interface
6.Winding speed:
Up to 120 rpm
Independently changeable storage line speed
Independently changeable winding speed
7.Core drive:
Stepper motor 0.8KW/3.3Nm
8.Line distance control:
Automatically change line spacing
Can be designed for changes as small as 0.001
9.Core idling and reverse control:
Fully automatic
10.Acceleration and deceleration:
Fully automatic
11.stop:
Fully automatic
12.Winding control:
Fully automatic
13.Taping operation:
Fully automatic
14.Machine head drive:
Servo motor 2KW/8.6Nm
15.Voltage supply:
220V, 50HZ
16.Machine dimensions and weight:
1100 x 100 MM, 600 KG NET, 700KG GROSS
GWA-70HMT Full Automatic Hook Winding and Taping Machine
| No. | Item category | Value |
| 1 | Equipment model: | GWA-70HMT |
| 2 | Adapt to the magnetic ring (outer diameter): | 14mm-45mm |
| 3 | Adapt to wire diameter: | 0.5mm-2.0mm |
| 4 | Length of unilateral line: | 1200mm |
| 5 | Winding speed: | Depends on wire diameter and number of coils |
| 6 | application winding method: | conventional winding method / forward winding |
| 7 | Power supply: | 220V/50Hz single-phase alternating current |
| 8 | Air source: | 0.55Mpa-0.60Mpa |
| 9 | Noise: | 60 decibels |
| 10 | Equipment power: | 3KW |
| 11 | Equipment power: | 0.55°/hour |
| 12 | Operating ambient temperature: | -5°C~40°C |
| 13 | Relative humidity: | (40~90)%RH |
| 14 | Comprehensive pass rate: | 99.5% |
| 15 | Dimensions: | length 1750mm (including belt line) * width |
| 16 | Machine weight: | 500KG |
1.Two winding machine head:One head for one side winding,the other for another winding
2.The machine is fully automatic operation, automatic loading and unloading,
alarm for lack of material
3.one person can monitor multiple machines, work 24 hours,
and the production efficiency can reach more than 3 times that of manual winding.
4.It only takes 25 seconds for a total of 30 turns on both sides to produce a finished product
Looking forward to your reply.
GW-9751i High efficiency copper wire automatic bobbin winder machine
| Spindles | 1 | Spread Motor | stepping Motor |
| Wire diameter | 0.5 - 2.5mm | Max Speed | 2000rpm |
| Spread Pitch | 0.001 - 9.999mm | Memory | 999 Sequences |
| Spread Width | 600mm(Max) | Power Source | AC 220V 50/60MHZ |
| Winding Width | 200mm(Max) | Weight | 75Kg |
| Main Motor | 500W DC Motor | Dimension | 940*510*430mm |
| Winding turns | 9999 | Special device | An external sensor can be installed to calculate the length |
Features:
1.This single spindle linear synchronal winding machine for highest efficiency
2.This bobbin transformer coil winding machine more convenience by using foot-switch
3.Memory capacity accommodates 999 sequences of parameters with off-power memory retention
GWP8-126 Eight Spindles full Automatic Linear Coil Winding Machine for bobbin transformer
| Number of winding spindles | 8 |
| Spindle speed | 10000rpm |
| Wire diameter | 0.05-0.6mm (more than 0.4mm need to add different accessories) |
| Spindle spacing | 126mm |
| Maximum bobbin outer diameter | 60mm |
| Spindle Inner Diameter | Standard:10mm Special :12mm\14mm |
| Guide pin moving range | X:80 Y:100 Z:70 mm |
| Winding motor power | 1.5KW\2.0KW |
| X\Y\Z axis power | 400W\750W |
| Pressure | 0.4-0.65Mpa |
| Supply voltage | AC220V±10% 50HZ |
| Total power | 2.8KW\4.0KW |
| Machine size | Length:1100mm Width:1000mm Height:1400mm |
| Machine weight | 800Kg |
| Winding servo motor | Panasonic Japan |
| X/Y/Z-axis servo motor | Panasonic Japan |
| Control System | Weiding high-precision six-axis motion controller |
| Human-machine interface | 7-inch WEINVIEW touch screen |
| Screw guide | Taiwan TBI, grade C accuracy |
| Timing belt | BANDO Japan |
| Bearing | NSK Japan |
| Sensors | Omron |
| Tensioner | High-precision magnetic tensioner |
| Spindle box | Cast iron box |
| Worktable board | Cast iron platen |
| Other mechanical components | Independent design |
Electronic transformer coil winding winder choke automatic toroidal winding coil making machine copper wire Coil Winding Machine with Wire Diameter 0.7-2.5mm Application:
Grewin Industrial Group Co., LTD, founded in 1993, is one of China's larges electronic transformer coil winding winder choke automatic toroidal winding coil making machine copper wire Coil Winding Machine with Wire Diameter 0.7-2.5mm manufacturers.
Widely used in toroidal transformer, current transformer, sensor, inductor manufacturing and other related industries.
){kind=link}