Low Voltage All in One Portable Cable Fault Tester NDT Cable Testing Equipment

• Usage: Network Cable Tester, HDMI Cable Tester, Audio Cable Tester, Coaxial Cable Tester, Digital Cable Tester
• Certification: CE, RoHS
• Customized: Non-Customized
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: RCI-700T
• Low Voltage Impulse: Distance Measurement Mode
• Sampling Frequency: 100MHz
• Distance Measurement Range: 30km
• Audio Signal Transmission Band: MID-Frequency 400Hz
• Gain of Signal Channel: 80dB
• Accuracy of Pin-Pointing: 0.1m
• Transmitting Frequency: 1kHz
• Transmitting Power: 3.5W
• Main Unit 1200m: 320*240 LCD
• Transport Package: Export Standard Carton or Customize Strong Pallet
• Specification: RCI-700T All In One Integrated Cable Fault Tester
• Trademark: Grewin
• Origin: China
• HS Code: 9030899090
• Production Capacity: 400 PCS Per Month

Product Description

Introduction


Along with the low-voltage pulse reflectometry, our systems implement advanced high-voltage pre-location technologies that allow to determine the distance to faults of various types with a minimal harmful effect on the cable lines.High level of safety during the testing with our cable test vans and mobile systems is ensured by built-in protection against overcurrent, overvoltage and overheating, as well as by the use of a continuous grounding monitoring, vehicle door closure sensors and self-health check monitoring.
High speed sample system and high bandwidth input circuit are integrated in the tester to get the exact reflection curve of signal so that the distance of fault point to signal sample point can be calculated in high accuracy and high resolution Special sound location tester configuration can be applied to locate the fault point more exactly.
The cable fault tester is suitable for measuring power cables, high-frequency coaxial cables, local telephone cables, street lamp cables, low-resistance of short-circuit, open-circuit disconnection faults, and various materials of various materials with different cross-sections and different media. Leakage and high resistance flashover faults. A powerful cable management system that automatically generates test reports.
It can test a variety of 35KV under different voltage grade, different sections, different media and all kinds of material of power cable faults, including: open circuit, short circuit, low resistance, high resistance, high resistance leak flashover fault.
It can be any cable length measurement of radio wave propagation in the known speed.It can test the power cables buried path and buried depth.route tracing evaluation of electric lines and cables.

The RCI-700T Integrated Power Cable Fault Tester is an intelligent power cable fault tester.
It has integrated functions as:

1. Fault locating
2. Pin-pointing
3. Basic route tracing

RCI-700T includes two main devices and the accessories

The function of the two devices:

1. RCI-700TM Integrated Power Cable Fault Tester

• Low voltage impulse fault distance testing
• Impulse current fault distance testing
• Audio magnetic synchronous pin-pointing
• Route tracing

1. RCI-700TT Route Tracing Signal Generator

• Transmit signal for route tracing

Compared with the traditional single functional device, the RCI-700T is portable with small size and low weight. It is an upgrade device in locating area.












Design Features

Salient function:

1. Full-featured:

1. Low voltage impulse fault distance testing
2. Impulse current fault distance testing
3. Audio magnetic synchronous pin-pointing
4. Route tracing

 

1. Fault distance locating:

1. Low voltage impulse method: apply to the distance measurement of low resistance fault, short circuit and open circuit fault
2. Impulse current method: apply to the distance measurement of high resistance fault, breakdown fault with current coupler for signal sampling.

 

1. Pin-pointing:

1. Audio and magnetic synchronously receiving with high anti-interference capability
2. Audio and magnetic signal waveform displaying to distinguish the signal and noise easily
3. Cursor test audio magnetic delay to display accurate fault point
4. Route tracing while pinpointing according the initial polarity of magnetic waveform

 

1. Route tracing:

1. Signal generator:

• High capacity lithium-ion battery
• Full-automatic power matching and protection
• High-power output

1. Peak and null method for route tracing
2. Signal amplitude display
3. 80% method and 45% method for depth detecting

 

1. Big LCD screen,4.3",320*240

 

1. SD card storage, easy to import to the computer

 

1.  High capacity lithium-ion battery matched with quick charger

 

1. Power supply management to reduce the consumption. Auto power off in 15 min. without operation.

 

1. Auto power off when low battery lever to protect the battery.

 

1. Integrated design and small size, easy to carry.

Tech. Specifications

Fault distance locating
Distance measurement mode		Low voltage impulse Impulse current
Sampling frequency		100MHz
Resolution Ratio		Low voltage impulse:1m Impulse current:4m
Voltage of low voltage impulse		30V
Distance measurement range		30km
Blind zone		2m
Magnetic sound synchronization pin-pointing:
Audio signal transmission band		Mid-frequency 400Hz ,bandwidth 200Hz.
Gain of signal channel		80dB
Accuracy of pin-pointing		0.1m
Route tracing:
(M)Receiving frequency		1kHz
(M)Gain		80dB
Generator for route tracing:
(T)Transmitting frequency		1kHz
(T)Transmitting power		≥3.5W
Output		Open circuit voltage≥100Vp-p Short circuit voltage ≥300mA Auto matching according the actual loading Auto short circuit protection
Power supply:
Battery		built-in Li-ion battery pack, nominal voltage 7.4V,Capacity 3000mAH
Power consumption		RCI-700TM 400mA ,RCI-700TT 500mA
Charger		Input AC100-240V, 50/60Hz; output 8.4V, DC 1A
Charge time		<4 hours
Display
Main unit 1200M		320*240 LCD
Generator		Meter
Other
Volume		270*220*80mm  M/T
Weight		1.5kg M/T
Working condition
Tem.		-10ºC-40ºC
Humidity		5-90%RH
Elevation		<4500m

Basic operation
 

1. Basic steps:

1. Fault judgment
2. Fault distance testing
3. Route tracing
4. Pin-pointing

1. Fault judgment and test method chosen

1. When cable fault appeared, first determine the fault character as below:

• Test the phase to phase and phase-earth insulation resistance of one end of the cable by megger. If the result is zero, please use the multimeter to test the resistance.
• If the insulation resistance is very high but insulation is normal, please check whether open circuit fault exist. Here user can make three phases short circuit to the earth and test on the other end to distinguish.
• Fault character distinguish and test method form

 

No	Fault	Fault form	Distance test method	Pin-pointing method
1	Low resistance	Megger:0 Multimeter:< 200Ω	Low voltage impulse	Audio-frequency(optional)
				Audio magnetic synchronous
2	Open circuit	Conductor disconnection		Audio magnetic synchronous
3	High resistance	Megger:>0 Or: Megger:0 Multimeter:≥ 200Ω	Impulse current
4	Breakdown	Megger:insulation normal Withstand voltage test:no

Remark:

1. The gray part in the form means that, for these functions, extra matched high voltage generator is needed.
2. Audio-frequency method to pinpoint the low resistance is optional. This need the matched CD-1200T route tracing signal generator.

Device introduction

1. Main unit and accessories
 

1. RCI-700TM Integrated power cable fault tester

• Function and accessories:

Low voltage impulse distance testing accessories: Low voltage impulse test line
Impulse current distance testing accessories: Impulse current coupler
Audio magnetic synchronous pin-pointing accessories: Pin-pointing sensor, earphone
Route tracing accessories: route sensor, earphone
 

1. RCI-700TT route tracing signal generator

• Signal generator for route tracing. Accessories: output line, earth stake

 

1. Charger for RCI-700TT/M
2. 
   

   Company introduction

   
   
   1.certification
   We have passed ISO9001:2015,CE,SGS approval and IEC report
   
   
   
   2.Company profile
   
   
        Tianjin Grewin is concentrating on transformers for 20 Years and complianted by ISO9001:2015,CB,IEC CB,CE etc.We're always pay great attention to its business philosophy "Quality and Honesty First".Grewin is specialized in the design and manufacture of wound components such as transformer,current sensors, chokes etc .windely used in communications,electronics,meters,industrial control,medical equipments and other fields.We are also a provider of power meters and instruments locators. 85% of its products exported to America, Europe, and Asia etc.We sincerely invite you to join us to create a bright future.

   3.Terms of Shipment:
   Within 10 working days after received related prepayment or L/C.
   
   4.Payment terms:
   (1)T/T 100% or 50% deposit by T/T in advance, balance amount to be paid 7 days before
   delivery.
   (2) By irrevocable L/C at sight, to be issued immediately against confirmed order.
   (3)Payment by T/T, if order amount is less than USD 20,000.
   
   5.Warranty:
   (1)We provide 1 year warranty.
   (2)If the product is defective, please notify us within 3 days of delivery.
   (3)All products must be returned on their original condition, in order to qualify for a refund or exchange of goods
   
   6.Why choose us?
   Quality and honest first!
   A. Flexible service for diffierent transformers with high efficiency performance.
   B. Over 40 years experience of transformer designing and producing.
   C.100% test of every single product we produce from incoming material checking.
   D. UL, CE, ISO9001:2008
   E. We offer custom-made transformers, OEM and ODM are welcome
   F. We deliver the quality you expect at consistently competitive prices
   G.Transformer quality lifetime:10 Years.
   H.Specialty Sales service:5 -10 Years
   
   7.Flow chart of trading activities:

   NO	Step	Days need
   1	Request for quotation	1 day
   2	Making quotations	1 day
   3	Offer and counter offer	3 days
   4	Sending and receiving samples	3-10 days
   5	Sample confirmation	3 days
   6	Placing a firm order	1 day
   7	Paying and receiving the down payment	1-4 day
   8	Factory production & Quality inspection	15-20 days
   9	Paying and receiving the balance	4 days
   10	Delivery of goods	1 days

   8.contact
   Tianjin Grewin Technology Co.,Ltd. 
    
   Web:transformer.en.made-in-china.com 
   Address: 2# MeiNian Plaza No.16 DongTing Road,Hexi Distr,300222,Tianjin China.