Clamp on Current Transformer for AC Current Measurement

• Application: Metering, Energy, Monitoring Devices
• Type: Electromagnetic
• Certification: CE
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: GWTA
• Customized: Non-Customized
• Output Signal Type: Clamp on CT
• Design Advantage: Clamp on Current Transformer
• Accuracy: 1%
• Primary Current: 0.1-1000A
• Useable Frequency: 10Hz to 100kHz
• Window Size: Check Specification Below
• Maximum Voltage: 600VAC
• Operating Temp: -10c to +50c
• Frequency: 40Hz-1000Hz
• Transport Package: Export Standard Cartons with Strong Pallets
• Specification: 400a 200A 500A 600A 1000A 0.333v 5A 1A
• Trademark: grewin clamp on current transformer
• Origin: China
• HS Code: 850450000
• Production Capacity: 10000 PCS /Week

Product Description

Our main product are Miniature votage transformer ,Miniature current transformer ,Instrument current transformer , Split Core Current Transformer, clamp on current transformer ,zero-flux current transformer ,three phase current transformer ,hall sensors .

0.5-1000A mV 1A 5A current sensor clamp on current transformer for motor
The GREWIN CTC series of clamp on current transformer are designed for fast and easy installation.The clamp on core design permits non-contactcurrent measurements through magnetic field induction without disconnecting cables or busbar circuits for CT installation. This method permits a safer, easier and portable current measurement.

Current probe(specifications)
Rated Primary current	0.1A-1000A
Output signal	mA/A or mV/A
Maximum Non-Destructive Current	2000A
Basic Accuracy	1%
Safety	CAT III 600V
Dielectric Resistance	1000MOhms @ 500 Vdc
Case Material	Polypropylene resinUL flame retardant rating 94-V0
Voltage rank	600Vac(isolated condition), 30Vac(bareness condition)
Maximum voltage	600Vac
Useable frequency	10Hz - 100kHz
Maximum Cable Diameter	2.05 inches (52 mm)
Dimensions	4.37x8.5 x1.77 in. (111x216x45 mm)
Operating Temperature	-10ºC to +50ºC
Standard	IEC 60044-1
Accessories	Supplied with feet for base mounting if required
Certification	RoHS compliant CE&ETL approved

Current probe(features)

Good appearance

Low cost

5 standard sizes

Clamp-on core design,safer,easier installation, portable

Both Silicon Steel & Nickel Alloy cores available

Current or three specs voltage output signal 

Current probe(applications)
 

Current, power energy,monitoring devices

Power Factor Correction devices

Oscilloscope and harmonic waves analyzer

 

Part number	Input current	Rated Output	Frequency (Hz)	Secondary Burden Resistance	Accuracy Class
GWCTC1535	0.5-1000A	1mA/A	40-1KHZ	≤10 Ohms	1%
	400-1000A	5A,1A	50/60HZ	≤2VA	1%
	0.1-10A	100mV/A	10-1000K	≥100KOhms	3%±10mV
	0.1-100A	10mV/A			2%±5mV
	1-1000A	1mV/A			1%±1mV
	0.5-1000A	4-20mA	50/60HZ	≤100 Ohms	1%

 

We can produce following similar clamp on current transformer:

 

1-200A Clamp on current transformer(specifications)
Rated Primary current	1-200A
Turn ratio	1:1000 1:2000 1:2500
Output	0.333V 1.5V
Accuracy	0.1, 0.2 ,1.0 Class
Second burden(Ohms)	<=5, <=50 ,>=100k
Dielectric Resistance	1000MOhms @ 500 Vdc
Case Material	Polypropylene resinUL flame retardant rating 94-V0
Voltage rank	600Vac(isolated condition), 30Vac(bareness condition)
High Potential	2500Volts/min
Frequency Range:	50/60Hz
Operating Temperature	-25ºC to +70ºC
Standard	IEC 60044-1
Accessories	Supplied with feet for base mounting if required
Certification	RoHS compliant CE&ETL approved

 

Clamp on current transformer(features)

Low cost

5 standard sizes

 Clamp-on core design,safer,easier installation, portable

Both Silicon Steel & Nickel Alloy cores available

Clamp on current transformer(applications)

Silicon Steel cores provide moderate accuracy and lower cost for appropriate current measurement

Nickel Alloy cores are suitable for applications that require the highest accuracy with minimal phase angle error. Applications would include electric power quality monitoring devices

Introduction:
 
This type CT is designed for easy installation in tight spaces and environent 
without removing the main busbar or cable The connector uses the holding
pressure of folding structure. Safe isolation to protect the user from direct
contact with the electrified body.Meet the 600V ,CAT III secure degree.

Features:
 1. Flexible and light weights, exquisite appearance
 2. Easy &quick installation in tight spaces
 3. Excellent linearity
 4. Maximum measuring current up to 550A
 Application of 600 V  max current 550 A  clamp on current transformer with  output voltage 1mV GWCT0346:


Shipping:

1. Products are shipped via UPS / DHL / EMS / HK EMS / FedEx / TNT and so on expresses (door to door).
2. We Provide Drop shipping Service.
3.20 days around delivery upon receiving payment if the qty is lower than 1000PCS and it is not customized products.
4. In order to ensure you receive your order tax free upon import, we declare lower value.
5. Shipping via EMS. UPS. FedEx and TNT express usually takes 3~7days dependent on the destination country.
 
 
Payment:

1. We accept Western Union and T/T
2.30% deposit and 70% before shipping
3. No payment collection. We only can deliver goods after getting full payment.
 
4.WHY CHOOSE US?
 
 

WHY CHOOSE US?

Quality and honest first!

A.  Flexible service for diffierent transformers with high efficiency performance.

B.  Over 40 years experience of transformer designing and producing.

C. 100% test of every single product we produce from incoming material checking.

D.  UL, CE, ROHS, ISO9001:2008

E.  We offer custom-made transformers, OEM and ODM are welcome

F.  We deliver the quality you expect at consistently competitive prices

G. Transformer quality lifetime:10 Years.

H. Specialty Sales service:5 -10 Years

 5. Contact Name Card: 
 

Alice
Tianjin Grewin Technology Co.,Ltd.
 
 
 
 
Website:
http://transformer.en.made-in-china.com