Low Voltage Impulse Locating Cable Fault Pre-Locating Locator

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: PCLC-901D
• Connectors: RJ11
• Test Region: Forming Cable
• Cable Type: Shielded
• Power: Hydraulic
• Certification: CE, RoHS
• Customized: Non-Customized
• Color: Orange
• Locating Method 1: Low Voltage Impulse Method
• Locating Method 2: Impulse Current Method
• Locating Method 3: Multiple Impulse Method
• Sampling Frequency: 200MHz
• Gain Range: 70dB
• Low Voltage Impulse Voltage: 32V
• Max.Resolution: 0.4m
• Battery: Endurance Time Over 7 Hours
• Communication Interface: USB
• Communication Interface2: Bluetooth
• Power Supply: Input AC220V
• Dim: 274X218X81mm
• Weight: 3.5kgs
• Operating Temperature: -10c-40c
• Humidity: 5-90%Rh
• Transport Package: Carton
• Specification: CE, ROHS
• Trademark: Grewin
• Origin: China Tianjin
• HS Code: 85043190
• Production Capacity: 5000000pieces
• Package Size: 12.00cm * 10.00cm * 8.00cm
• Package Gross Weight: 1.000kg

Product Description

Product name: PCLC-901D Cable Fault Detection Instruments Test Equipment Tester cable fault locator


INTRODUCTION

 

The PCLC-901D Power Cable Fault Pre-locator is an easy operation device used for distance locating .It can test a variety of 35KV under different voltage grade, different sections, different media and all kinds of material of power cable faults, including: communication cables, coaxial cable and metal aerial cables,open circuit, short circuit, low resistance, high resistance, high resistance leak flashover fault.
It's easy to operate,support both touch screen/button operation and with friendly interface.

PCLC-901D can be used alone under the low voltage impulse mode.

Under the mode of impulse current,PCLC-901D needs to work with HVSG-500GX high voltage generator items.Under the multiple impulse mode,PCLC-901D also need PCLC-900C coupler.After distance locating,user could use PCLD-901P items for fault pinpointing. And these products can

be combined into a set of high performance and innovative cable fault testing system.
 

FUNCTION FEATHER:
 

 

Multiple distance locating method:

-Low current impulse method: apply to the locating of the low resistance fault. Short circuit fault, open circuit fault. It also can be used in the

measurement of the cable length, the intermediate joints, T joints, and cable termination joint. This method also can be used to correct the

wave velocity.

-Impulse current method: apply to the high resistance fault, breakdown fault. Use the current coupler to gather signal from the earth wire

-Multiple impulse method: improvement of the SIM method

 

200MHz real-time sampling

-Advance tech.Upgrading for SIM method

-Max. 0.4m measurement resolution,PCLC-901D has small blind zone and is special for the short cable and nearly-terminal fault cable

 

Touch screen and press key operation

-Touch operating screen with smart gesture operation

-Support cursor drag-drop function and double-click function,easy to locate

-Simple function menus with high performance.

 

Big color LED screen, friendly interface

-Simple function menus with high performance

 

7" LED screen,160°viewing angle,bright with 750cd/m2 to view under sunshine

-PIP copy(pic. temporary storage). There'll be a main window and three temporary storage windows could check three waveform together.

 

Waveform storage and PC communication

-Special software management for software upgrade, backup and restore in device.

-Waveform storage and communication with computer.

-Internal storage of waveform.

-Optional mini printer for waveform printing

-Support connection with PC or laptop

 

Power management

-Back light weakens if no operation in 2 min and power off in 10 min. if no operation.

-Built-in Polymer Lithium-ion battery.

-Working time could reach 7 hours for each use.
 

SPECIFICATION:
 

Locating methods: Low voltage impulse method Impulse current method Multiple impulse method

 

 

Sampling frequency: 200MHz

Gain range: 0-70dB

Low voltage impulse voltage: 32V

Max.resolution: 0.4m

Locating range: 100km

Dead zone: 2m

Battery: L-ion battery rechargeable batteries,7.4 V

endurance time over 7 hours

Communication interface: USB,bluetooth (optional)

Power supply: Input AC220V,50Hz,current 1A,charge for 6 hours

Dim.: 274×218×81mm

Weight: 3.5kgs

Operating Temperature: -10ºC-40ºC

Humidity: 5-90%RH

Elevation: <4500m<>
 

PHYSICAL CHARACTERISTICS AND OPERATION

CONFIGURATION Standard : main unit, low voltage impulse testing guideline, impulse testing connecting wire and filter,charger and so on.

MAIN UNIT PANEL shows the operation interface



Details:
LED screen : Display all the information. Will introduce in the following.
Signal port: connect with testing wire. Choose different wires under different testing mode.
Charging port:connect with wire for built-in battery
USB disk:save or import waveform
Multiple function button:total five functions,up,down,left,right and enter.Up and down button is used for gain adjustment,left and right button is used for cursor adjustment, and enter is used to switch the dotted cursor and soiled cursor
Power indicator light:it will light when power on
Power/Menu : Turn on or off the machine.When power on,it's menu button.Short press into the menu,press again to exit.
Test button:Press to test.




 

Company introduction

1.certification
We have passed ISO9001:2015,CE,SGS approval and IEC report


2.Company profile



Tianjin Grewin is concentrating on transformers for 20 Years and complianted by ISO9001:2015,CB,IEC CB,CE etc.We're always pay great attention to its business philosophy "Quality and Honesty First".Grewin is specialized in the design and manufacture of wound components such as transformer,current sensors, chokes etc .windely used in communications,electronics,meters,industrial control,medical equipments and other fields.We are also a provider of power meters and instruments locators. 85% of its products exported to America, Europe, and Asia etc.We sincerely invite you to join us to create a bright future.

3.Terms of Shipment:
Within 10 working days after received related prepayment or L/C.

4.Payment terms:
(1)T/T 100% or 50% deposit by T/T in advance, balance amount to be paid 7 days before
delivery.
(2) By irrevocable L/C at sight, to be issued immediately against confirmed order.
(3)Payment by T/T, if order amount is less than USD 20,000.

5.Warranty:
(1)We provide 1 year warranty.
(2)If the product is defective, please notify us within 3 days of delivery.
(3)All products must be returned on their original condition, in order to qualify for a refund or exchange of goods

6.Why choose us?
Quality and honest first!
A. Flexible service for diffierent transformers with high efficiency performance.
B. Over 40 years experience of transformer designing and producing.
C.100% test of every single product we produce from incoming material checking.
D. UL, CE, ISO9001:2008
E. We offer custom-made transformers, OEM and ODM are welcome
F. We deliver the quality you expect at consistently competitive prices
G.Transformer quality lifetime:10 Years.
H.Specialty Sales service:5 -10 Years

7.Flow chart of trading activities:

NO	Step	Days need
1	Request for quotation	1 day
2	Making quotations	1 day
3	Offer and counter offer	3 days
4	Sending and receiving samples	3-10 days
5	Sample confirmation	3 days
6	Placing a firm order	1 day
7	Paying and receiving the down payment	1-4 day
8	Factory production & Quality inspection	15-20 days
9	Paying and receiving the balance	4 days
10	Delivery of goods	1 days

8.contact
Tianjin Grewin Technology Co.,Ltd.

Web:transformer.en.made-in-china.com
Address: 2# MeiNian Plaza No.16 DongTing Road,Hexi Distr,300222,Tianjin China.