Spindle Cable Fault Locator Hipotronics PVC Sheathed Cable Fault Test Equipment

Product Details
Customization: Available
Usage: Network Cable Tester, HDMI Cable Tester, Audio Cable Tester, Coaxial Cable Tester, Digital Cable Tester
Certification: CE, RoHS
Shipping & Policy
Shipping Cost: Contact the supplier about freight and estimated delivery time.
Payment Methods:
visa mastercard discover JCB diners club american express T/T
PIX SPEI OXXO PSE OZOW
  Support payments in USD
Secure payments: Every payment you make on Made-in-China.com is protected by the platform.
Refund policy: Claim a refund if your order doesn't ship, is missing, or arrives with product issues.
Secured Trading Service
Diamond Member Since 2011

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

High Repeat Buyers Choice
More than 50% of buyers repeatedly choose the supplier
Years of Export Experience
The export experience of the supplier is more than 10 years
In-stock Capacity
The supplier has In-stock capacity
100% Finished Products Inspection
The supplier inspects 100% of finished products.
to see all verified strength labels (22)
  • Spindle Cable Fault Locator Hipotronics PVC Sheathed Cable Fault Test Equipment
  • Spindle Cable Fault Locator Hipotronics PVC Sheathed Cable Fault Test Equipment
  • Spindle Cable Fault Locator Hipotronics PVC Sheathed Cable Fault Test Equipment
  • Spindle Cable Fault Locator Hipotronics PVC Sheathed Cable Fault Test Equipment
  • Spindle Cable Fault Locator Hipotronics PVC Sheathed Cable Fault Test Equipment
  • Spindle Cable Fault Locator Hipotronics PVC Sheathed Cable Fault Test Equipment
Find Similar Products

Basic Info.

Model NO.
FLD-902D
Customized
Non-Customized
Output Frequency
1Hz
Open Circuit Voltage
Effective Value of Fundament
Pulsating DC
Peak 8kv,Amount to 10kv Phase Voltage
Shirt Circuit DC
Effective Value of Fundamental Wave 0~35mA
Max. Power
900W
Dimension
Transmitter 417mmx234mmx318mm
Weight
Transmitter 16.8kg
Transport Package
Export Standard Carton or Customize
Specification
FLD-902D Over head line grounding fault locator
Trademark
Grewin
Origin
China
HS Code
9030899090
Production Capacity
100 PCS Per Month

Product Description

  1. Introduction:
    Spindle Cable Fault Locator Hipotronics PVC Sheathed Cable Fault Test Equipment
    Spindle Cable Fault Locator Hipotronics PVC Sheathed Cable Fault Test Equipment

    Along with the low-voltage pulse reflectometry, our systems implement advanced high-voltage pre-location technologies that allow to determine the distance to faults of various types with a minimal harmful effect on the cable lines.High level of safety during the testing with our cable test vans and mobile systems is ensured by built-in protection against overcurrent, overvoltage and overheating, as well as by the use of a continuous grounding monitoring, vehicle door closure sensors and self-health check monitoring.
    High speed sample system and high bandwidth input circuit are integrated in the tester to get the exact reflection curve of signal so that the distance of fault point to signal sample point can be calculated in high accuracy and high resolution Special sound location tester configuration can be applied to locate the fault point more exactly.
    The cable fault tester is suitable for measuring power cables, high-frequency coaxial cables, local telephone cables, street lamp cables, low-resistance of short-circuit, open-circuit disconnection faults, and various materials of various materials with different cross-sections and different media. Leakage and high resistance flashover faults. A powerful cable management system that automatically generates test reports.
    It can test a variety of 35KV under different voltage grade, different sections, different media and all kinds of material of power cable faults, including: open circuit, short circuit, low resistance, high resistance, high resistance leak flashover fault.
    It can be any cable length measurement of radio wave propagation in the known speed.It can test the power cables buried path and buried depth.route tracing evaluation of electric lines and cables.




    Overview:
    Good solution of the pinpointing of single phase to earth fault as signal transmitter and it can also matched with FLD-903P EHV cable sheath fault pinpointer to do sheath fault pinpointing.

    1.1 Feather
  2. Auto testing. Big LCD displays the distance directly. Easy operation and solute the difficulty of HV Bridge balance adjusting.
  3. Overcome the HV bridge disadvantage that can't locating because lack of good insulation sheath in site.
  4. Built-in HV continuous current. Output voltage and current is continuously adjustable and period optional.
  5. Inject signal to reappear the fault, easy pinpointing with stable current signal.
  6. VLF signal to avoid effect of system distributed capacitance and easy to pinpoint the high resistance fault.
  7. Support both power supply and storage battery supply
  8. Light weight and easy to portable.

  9. 1.2 Specification
     
  10. Output frequency:1Hz
  11. Open circuit voltage: effective value of fundamental wave 0~2800V
    Pulsating DC: peak 8kV,amount to 10kV phase voltage peak
    Shirt circuit DC: effective value of fundamental wave 0~35mA (pulsating DC,peak
    100mA)
  12. Max. Power:900W
  13. Dimension: transmitter 417mmx234mmx318mm
  14. Weight: transmitter 16.8kg
                  
  15. Equipment Composition
  16. It is used to inject ultralow frequency pulsating DC signal to the fault line.

    The transmitter panel as below:
    Spindle Cable Fault Locator Hipotronics PVC Sheathed Cable Fault Test Equipment




    Power socket: contact with 220V power
    Protective tube: change protective tube if needed
    Power switch: turn on/off the device
    HV on: when turn on the device, press this button when output adjustment on the ZERO position to output HV signal.
    HV off: Stop HV output
    Zero: indicate that the output voltage on the zero position
    Protect: when the device become protect mode, this indicator will be bright to show the device is in protect blocking state. Adjust the Output adjust button to Zero position to reset the indicator.
    Output adjust: adjust the output current and voltage. When it on the Zero position, to press HV on button to start the transmitter signal output function.
    Protect current: indicate the input current value. If current is over default max. 4A,the device will be stopped. Then it is needed to zero the output adjustment button to set protective circuit to readjustment the current.
    Output voltage: indicate the value of output voltage
    Earth: earth terminal to contact with the earth line to connect the earth mat.
    HV out: connect the fault line. According the local state to clip the switchgear wire or connect the faulty line with rod of patch board 
    Test ground: connect with earth mat.
    3. Method of application

    3.1 Work principle

    Transmitter output is impulse DC signal which frequency is 1Hz.Low frequency less impact by the system division capacitance. It is proved the 1Hz signal can satisfy most requirements from the testing site.
    The limited voltage of the transmitter is 8kV.It is equal the phase voltage peak value of 10kV line. If the voltage too high, it will bring line major insulation broken. If it's too low, the fault can't be reappeared. This value could be adjusted when production.
    Hanging the sensor along with the line to test the current. Sensor test the current on the line and automatic zero setting then converse analog signal into the digital signals to transmit by wireless mode.

    3.2 Operation of the transmitter

    3.2.1 Wiring
    First beak the fault line, then connect the it with utility power(220V).Connect the earth line with Protect ground terminal and the earth grid.
    Wire the earth test line (HV line with black clip) to the earth test grounding and earth gird.

    We could wire the output line of the fault line according the site conditions. Connect the short line which has a red clip with the line terminal and the line side of the switchgear. If must connect it on the overhead line ,we suggest to use the long line. Connect its high voltage outlet with the line terminal, and then connect the other line on the insulation hanging rod, then hang the rod on the fault line.


    3.2.2 Power supply
    Open the power switch. Now the transmitter still doesn't transmit.

    3.2.3 Start and output
    First adjust the output adjust button to ZERO.Now the Zero is bright.
    Then press HV on button to begin the output. Now the HV indicator is light.
    Turn up the output adjust button slowly to rise the current but make sure the protective indicator doesn't light. If this indicator light, it indicates the faulty line has small resistance so the input current is too high. Now it's needed to adjust the output adjust button to ZERO anticlockwise and readjust to suitable position.

    3.2.4 Stop output.
    If need to stop the output, press HV off button

    3.2.5 After test, turn off power and disconnect the wiring.  

    Company introduction

    Spindle Cable Fault Locator Hipotronics PVC Sheathed Cable Fault Test Equipment

    1.certification
    We have passed ISO9001:2015,CE,SGS approval and IEC report
    Spindle Cable Fault Locator Hipotronics PVC Sheathed Cable Fault Test Equipment
    Spindle Cable Fault Locator Hipotronics PVC Sheathed Cable Fault Test Equipment


    2.Company profile
    Spindle Cable Fault Locator Hipotronics PVC Sheathed Cable Fault Test Equipment


         Tianjin Grewin is concentrating on transformers for 20 Years and complianted by ISO9001:2015,CB,IEC CB,CE etc.We're always pay great attention to its business philosophy "Quality and Honesty First".Grewin is specialized in the design and manufacture of wound components such as transformer,current sensors, chokes etc .windely used in communications,electronics,meters,industrial control,medical equipments and other fields.We are also a provider of power meters and instruments locators. 85% of its products exported to America, Europe, and Asia etc.We sincerely invite you to join us to create a bright future.

    3.Terms of Shipment:
    Within 10 working days after received related prepayment or L/C.

    4.Payment terms:
    (1)T/T 100% or 50% deposit by T/T in advance, balance amount to be paid 7 days before
    delivery.
    (2) By irrevocable L/C at sight, to be issued immediately against confirmed order.
    (3)Payment by T/T, if order amount is less than USD 20,000.

    5.Warranty:
    (1)We provide 1 year warranty.
    (2)If the product is defective, please notify us within 3 days of delivery.
    (3)All products must be returned on their original condition, in order to qualify for a refund or exchange of goods

    6.Why choose us?
    Quality and honest first!
    A. Flexible service for diffierent transformers with high efficiency performance.
    B. Over 40 years experience of transformer designing and producing.
    C.100% test of every single product we produce from incoming material checking.
    D. UL, CE, ISO9001:2008
    E. We offer custom-made transformers, OEM and ODM are welcome
    F. We deliver the quality you expect at consistently competitive prices
    G.Transformer quality lifetime:10 Years.
    H.Specialty Sales service:5 -10 Years

    7.Flow chart of trading activities:


    NO

    Step

    Days need

    1

    Request for quotation

    1 day

    2

    Making quotations

    1 day

    3

    Offer and counter offer

    3 days

    4

    Sending and receiving samples

    3-10 days

    5

    Sample confirmation

    3 days

    6

    Placing a firm order

    1 day

    7

    Paying and receiving the down payment

    1-4 day

    8

    Factory production & Quality inspection

    15-20 days

    9

    Paying and receiving the balance

    4 days

    10

    Delivery of goods

    1 days

    8.contact
    Tianjin Grewin Technology Co.,Ltd. 
     
    Web:transformer.en.made-in-china.com 
    Address: 2# MeiNian Plaza No.16 DongTing Road,Hexi Distr,300222,Tianjin China. 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier
Product Groups
More