Gwl-520 Low Noise Gear Type Toroidal Transformer Winding Machine

Product Description

Product Description

GWL-520 Low noise gear type toroidal winding machine

 
SPECIFICATION  

Wire diameter	1.0-4.0	Max.winding speed	120rpm/min
Final coil.O.D	Φ130-450mm	Magazine width	10-30mm
Min.final coil.I.D	Φ70	Supply voltage	AC 220V(50Hz)
Max.finalcoil height	220	Magazine Perimeter	1200mm
Controller storage capacity Programs	50*20 set	Power	1.8kw

 

FEATURES:
1. The gear type winding machine has the characteristics of large winding torque, high opening size of tooth ring/wire ring, large storage amount of wire and wide range of suitable winding diameter, etc., is the most widely used model; It is suitable for winding products with thick diameter, neat winding arrangement and multi-strand winding, such as small ring transformer secondary winding, high power ring transformer primary winding, large diameter inductor magnetic ring, current transformer coil and so on.

2. Less noise than ordinary copper ring rail gear type operation, high speed and stable, no impact of the mouth, longer service life, suitable for winding diameter range.

3. Due to the use of non-sliding friction transmission mode, the mechanical structure loss is small, the life of the main components such as gears is more than 30% longer than the copper ring guide rail type, and the lubricating oil is not often added during the use of the process to avoid splashing during the processing of the product quality.

4. The same model can be replaced with different width storage wire rings to meet the storage amount and complete inner diameter of different sizes of products, and the application range is wider.

1. The jig can be adjusted in a wide range, the line density can be quickly adjusted and the line density can be segmented, especially suitable for winding transformer products with multiple windings.

 

GWL-6200 Slider type toroidal transformer coil winding machine

Equipment model	GWL-6200
Winding mode	Gear type
Finally complete the outside diameter	60-120
Minimum finished inside diameter	35
Maximum completion height	80
Suitable winding diameter range	0.2-0.7
Diameter of wire storage ring	195
Width of storage ring	9-12
Maximum speed	800 RPM
Operating voltage	220V/50HZ
Overall dimension	500x600x700
Weight	90KG

Features:
1.Toroid Coil Winder Machine feature high quality,easy to operate.
2.Automatic transformer winding machineLock gap shuttles,with polished sliders,gentle on wire insulation.
3.Coil transformer winding machine is ability to control winding speed.
 

GWLA-0319 Gear type middle speed copper wire toroidal coil winder

Equipment model	GWLA-0319
Winding mode	Gear type
Finally complete the outside diameter	60-200
Minimum finished inside diameter	25
Maximum completion height	80
Wire size	0.5-1.6
Diameter of magazine	250
Width of magazine	3-8
Depth of storage ring	10/12/16
Maximum speed	230 RPM
Operating voltage	220V/50HZ
Overall dimension	500x600x750

Features:
1.Brake tension adjustable, Good settlement for large outer diameter, small inner diameter,transformer coil winder  heavy wire coils.
2.Current transfromer coil winding machine with high production efficiency, increase winding efficiency by adjustment of suitable brake tension
3.It adopts the latest microcomputer full Chinese liquid crystal display controller, which has practical functions 
 

GWL-0519 Gear type Current Transformer Winding Machine

Wire diameter	0.7-2.0mm	Max.winding speed	200rpm
Max.final coil.O.D	φ60-250mm	Magazine width	4-18mm (optional) standard 8mm
Min.final coil.I.D	Φ40	Supply voltage	AC 220V(50Hz)
Max.finalcoil height	90	Mechanical dimensions	650*500*700mm
Controller storage capacity Programs	50*20 set	Wight	120kg

Features:
1.High quality auto transformer coil winder guarantee no wire damage.
2.Parts highly optimized and universal for general use, Easy maintenance
3.Enquiries can be quoted one day service
 

GWL-815 Gear type high quality coil winding machine for toroidal transformer

Wire diameter	0.3-1.6mm	Max.winding speed	300rpm
Max.final coil.O.D	Φ50-200mm	Magazine width	3-10mm (optional)
Min.final coil.I.D	Φ20mm	Supply voltage	AC 220V(50Hz)
Max.final coil height	60mm	Mechanical dimensions	650*500*700mm
Controller storage capacity Programs	50*20 set	Wight	100kg

Features:
1.Accurately wire and tape spacing by adjustable.
2.Toroid Digital Transformer Winding Machine can easily exchangeable magazines secure maximum flexbility.
3.Extremely powerful,maintenance free AC motors for main drive and core rotation.
 

GWL-0619 Big gear high stability floor type winding machine for inductor

Equipment model	GWL-0619
Winding mode	Gear type
Max.Final outer diameter	130-450
Mini final inside diameter	70
Max Final height	220
Wire diameter	1.0-4.0
Perimeter of magazine	1200
Width of magazine	10-30(Optional)
Max winding speed	120 rpm/min

Features:
1.Floor type winding machine Complete range of articles, large range of wire diameter, Multipurpose
2.Big toroidal transformer winder machine with good compatibility, parts are interchangeable
3.High stability, part quality guarantee


GWLJ-0519 Gear type Rectangle transformer coil winding machine

 

Wire size	0.7-2.0mm(Single enamelled copper wire, multi-wire winding, the combined strength does not exceed the maximum value)
Finish the outer length/width	60-300mm (Please note: 60-300mm does not mean such a wide range directly, but refers to adjustment by adjusting some installed parts. If the maximum 300mm is selected, products smaller than 150mm cannot be processed; on the contrary, if the product is selected to be suitable for small products, it cannot be processed. Products larger than 150mm.)
Minimum the inner length/width	45mm(Length is greater than 45mm Width is greater than 45mm)
Maximum finished height	60mm
Magazine width	4-18mm(Optional)Standard configuration (8mm)
Magazine perimeter	720mm
Max winding speed	250rpm/min
Controller storage capacity Programs	50*20set (1000  running programs)
Weight	120KG
Dimension	650*500*700mm

Features:
1.Rectangular Coil Winding Machine are advanced,strongly built workhorses capable of winding light as well as heavy wire without insulation damage.
2.Copper wire Rectangular winder extremely powerful,maintenance free AC motors for main drive and core rotation.
3.Easily exchangeable magazines secure maximum flexibility.


 GWV-12A Servo motor  PLC contorller Toroidal Transformer Winding machine

Wire size	0.15-2.36mm
Minimum finish inner diameter	25mm
Maximum completion height	100mm
Maximum finish outer diameter	25-300mm
Max speed	150rpm
Tape Magazine diameter	220mm

 Features:      

1.The servo motor + paired with proximity switch counting ensures hundreds of percent accurate turns, and the maximum idle speed of the machine head can reach 150rpm
2.The stepper motor ensures exquisite wiring
3.Brand new PLC+touch screen control system, German manufacturing technology

GW-29T PLC contorller Toroidal Transformer coil Winding machine with                Servo motor

Wire size	0.2-1.6mm
Minimum finish inner diameter	17mm
Maximum completion height	70mm
Maximum finish outer diameter	50-150mm
Max speed	240rpm
Tape Magazine diameter	210mm

 Features:   
This model is a professional machine for winding toroidal transformers, toroidal
potentiometers, and toroidal current transformers with exquisite wiring and powerful
power to adapt to various wire diameters.
   

 

 

 GWV10-PLC Automatic Micro core Servo motorToroidal Coil Winding Machine

Wire size	0.05-0.32mm
Minimum finish inner diameter	1.8mm
Maximum completion height	10mm
Maximum finish outer diameter	5-14mm
Max speed	1500rpm
Magazine inner diameter	60mm

 Features:   
1.Actual input of the inner and outer diameter, wire diameter and wire spacing values of the magnetic ring without repeated debugging is required.
2. Can be completed automatically: dense winding, sparse winding, multi-layer winding, forward and reverse winding, segmented winding, multi-thread parallel winding, etc.winding method.
3.The main motor is a 400-watt servo, with constant torque and precise rotation, and the magnetic core clamp is driven by a stepper motor neat and beautiful wiring.


GW-7004 New design servo motor Intelligent fully automatic toroidal coil                                                           winding machine

1	Model	GW-7004
2	power supply	220V/110V 50/60HZ
3	Air pressure	0.6Kpa-0.8Kpa
4	Maximum wire diameter	0.2mm
5	Minimum wire diameter	0.05mm
6	Maximum finished outer diameter	40mm
7	Minimum finished inner diameter	6mm
8	Maximum finished product height	20mm
9	Line spacing control	Programming control
10	Sectional winding control	Programming control
11	Cumulative winding control	Programming control
12	Cable motor	Hybrid stepping motor
13	Main motor	servo motor
14	Winding speed	Adjustable,the fastest equipment is1400rpm
15	physical  dimension	900mm*900mm*1500mm
16	Weight	75KG

 

 Features:   
1.winding speed:7004:1300rpm  7005:1200rpm
2.Output:About 20PCS/hour if the winding turn is 3000 turns.
3.Main motor: servo motor make the wiring more precise
4.PLC controller
5.This machine is very easy to operate,one worker can watch over 30-50 machines at same time in china.
6.Three winding mode:Clockwise mode CMC mode Back and forth mode.

GW-F60  Toroidal Transformer Winding machine

Model:	GW-F60
wire diameter range:	0.5-3.5MM (single wire:3mm,double wire:2.8mm*2)
magazine diameter:	490MM
Max. finished O.D.:	100-3500MM
Min. finished I.D.:	45
Max. finished height:	200
Max. Winding Speed:	80
Winding head	GW444

 Brief technical description:
The GW-F60 chassis is a floor-standing heavy-duty chassis specially designed for large magnetic cores and thick wire diameters. It has stronger power and a wider range of adaptability. It uses PLC control and a touch screen display interface, and can be applied to a variety of machines. heads and clamps.
This product is composed of standard components, including: electronic controller, machine head servo motor, clamp stepper motor (servo can also be
control). Users can easily edit text commands into the controller software.
GWP-F60 is mainly used for tape wrapping and winding of some difficult product specifications.

Technical Parameters:
1.Controller:
PLC controller

2.show:
7-inch touch screen monitor

3.Program capacity:
30 programs                                    Each program contains 30 segments

4.program:
User edit text command                   Independent operation menu

5.Data storage and output:
PC interface                                      Software update interface

6.Winding speed:
Up to 120 rpm
Independently changeable storage line speed
Independently changeable winding speed

7.Core drive:
Stepper motor 0.8KW/3.3Nm

8.Line distance control:
Automatically change line spacing    
Can be designed for changes as small as 0.001

9.Core idling and reverse control:
Fully automatic

10.Acceleration and deceleration:
Fully automatic

11.stop:
Fully automatic

12.Winding control:
Fully automatic

13.Taping operation:
Fully automatic

14.Machine head drive:
Servo motor 2KW/8.6Nm

15.Voltage supply:
220V, 50HZ

16.Machine dimensions and weight:
1100 x 100 MM, 600 KG NET, 700KG GROSS

GWA-70HMT  Full Automatic Hook Winding and Taping Machine

No.	Item category	Value
1	Equipment model:	GWA-70HMT
2	Adapt to the magnetic ring (outer diameter):	14mm-45mm
3	Adapt to wire diameter:	0.5mm-2.0mm
4	Length of unilateral line:	1200mm
5	Winding speed:	Depends on wire diameter and number of coils
6	application winding method:	conventional winding method / forward winding
7	Power supply:	220V/50Hz single-phase alternating current
8	Air source:	0.55Mpa-0.60Mpa
9	Noise:	60 decibels
10	Equipment power:	3KW
11	Equipment power:	0.55°/hour
12	Operating ambient temperature:	-5°C~40°C
13	Relative humidity:	(40~90)%RH
14	Comprehensive pass rate:	99.5%
15	Dimensions:	length 1750mm (including belt line) * width
16	Machine weight:	500KG

Features:   

 

1.Two winding machine head:One head for one side winding,the other for another winding

2.The machine is fully automatic operation, automatic loading and unloading,

alarm for lack of material

3.one person can monitor multiple machines, work 24 hours,

and the production efficiency can reach more than 3 times that of manual winding.

4.It only takes 25 seconds for a total of 30 turns on both sides to produce a finished product

Looking forward to your reply.

  GW-9751i High efficiency copper wire automatic bobbin winder machine

Spindles	1	Spread Motor	stepping Motor
Wire diameter	0.5 - 2.5mm	Max Speed	2000rpm
Spread Pitch	0.001 - 9.999mm	Memory	999 Sequences
Spread Width	600mm(Max)	Power Source	AC 220V  50/60MHZ
Winding Width	200mm(Max)	Weight	75Kg
Main Motor	500W DC Motor	Dimension	940*510*430mm
Winding turns	9999	Special device	An external sensor can be installed to calculate the length

 

Features:   
1.This single spindle linear  synchronal winding machine for highest efficiency
2.This bobbin transformer coil winding machine more convenience by using foot-switch
3.Memory capacity accommodates 999 sequences of parameters with off-power memory retention

GWP8-126 Eight Spindles full Automatic Linear Coil Winding Machine for bobbin transformer

Number of winding spindles	8
Spindle speed	10000rpm
Wire diameter	0.05-0.6mm (more than 0.4mm need to add different accessories)
Spindle spacing	126mm
Maximum bobbin outer diameter	60mm
Spindle Inner Diameter	Standard:10mm Special :12mm\14mm
Guide pin moving range	X:80 Y:100 Z:70 mm
Winding motor power	1.5KW\2.0KW
X\Y\Z axis power	400W\750W
Pressure	0.4-0.65Mpa
Supply voltage	AC220V±10% 50HZ
Total power	2.8KW\4.0KW
Machine size	Length:1100mm Width:1000mm Height:1400mm
Machine weight	800Kg

Description of main components:

Winding servo motor	Panasonic Japan
X/Y/Z-axis servo motor	Panasonic Japan
Control System	Weiding high-precision six-axis motion controller
Human-machine interface	7-inch WEINVIEW touch screen
Screw guide	Taiwan TBI, grade C accuracy
Timing belt	BANDO Japan
Bearing	NSK Japan
Sensors	Omron
Tensioner	High-precision magnetic tensioner
Spindle box	Cast iron box
Worktable board	Cast iron platen
Other mechanical components	Independent design

Features:   
1.The control part adopts the most advanced multi-axis motion control system, with excellent performance such as linear and circular interpolation, spiral winding, etc.
2.All moving parts are driven by AC Panasonic servo motors with high speed, accurate positioning and long service life.
3.All important components are imported brands.

 

                                                

Application

Electronic transformer coil winding winder choke automatic toroidal winding coil making machine copper wire  Coil Winding Machine with  Wire Diameter 0.7-2.5mm Application:
 

 

Company Profile

Grewin Industrial Group Co., LTD, founded in 1993, is one of China's larges electronic transformer coil winding winder choke automatic toroidal winding coil making machine copper wire  Coil Winding Machine with  Wire Diameter 0.7-2.5mm  manufacturers.

Widely used in toroidal transformer,  current transformer, sensor, inductor manufacturing and other related industries.
Our team always adheres to the concept of serving customers and meeting customer needs, and has won unanimous praise from customers.

Certifications

 

 

Our Team with Customers

 

 

Packaging & Shipping

Packaging Material: Carton/Wooden case with foam inside.

1.General package(Paper carton or plastic bag): For small euipped parts for ToroidalTransformerWindingMachine
Package it with form and pack paper to guarantee unbroken during the transport.

2.Wooden case package: For larger scale Toroidal Winding machine ,we have special skilled carpenter, who would make the proper wooden case with exact thickness,density,length. The up arrow ↑marked on the outer wooden case. Buffer material would be put in the wooden case to prevent crack and shock.



After -sales service:

PRE-SALE:
1. Strong and professional team of engineers, rich experience
2. Able to provide innovative solutions and quotes in one day

IN SALE:
1. Delivery time: 5-10 days(standard machine), 30 days(custom )
2. Free consulting service: in-depth understanding of customer needs
3. Provide professional advice: including the choice of parts type and consumable parts of the machine.

AFTER-SALE:
1.24 hours free remote service: video guide and telephone
2. Warranty:1 year after-sales service