Specificaton
GWL-815 Low noise Gear Type Toroidal Coil Winding Machine
| Wire diameter |
0.3-1.6mm |
Max.winding speed |
300rpm |
| Max.final coil.O.D |
φ60-180mm |
Magazine width |
3-10mm (optional) |
| Min.final coil.I.D |
Φ25mm |
Supply voltage |
AC 220V(50Hz) |
| Max.final coil height |
80mm |
Mechanical dimensions |
650*500*700mm |
| Controller storage capacity Programs |
50*20 set |
Wight |
100kg |
Detailed Photos
FEATURES
1. It adopts full-tooth transmission, with the characteristics of low running noise, fast product clamping, large suitable winding diameter, compact and beautiful wire arrangement, and is often used to wind the secondary coil of transformers and other products with high requirements such as mutual inductors.
2. It is suitable for winding a variety of wires, such as enameled copper wire, enameled aluminum wire, steel wire, nylon wire, etc., suitable for coil processing of products in various industries
3. The machine head uses synchronous belt transmission, which has the characteristics of low running noise, long life and maintenance-free
4. The maximum winding speed can be set at will according to the wire diameter and product characteristics
5. Automatically rotate the wire arrangement function when arranging the wire Yes, when making transformer products with more turns, the lead position is reserved
6. The maximum speed of wire storage and winding can be adjusted separately, which significantly improves production efficiency when winding small wire diameter products and the winding speed cannot be too fast
7. Multiple wire storage and multiple winding can be set. For products with more turns that cannot be stored enough at one time, or products with multiple windings but different wire diameters, winding can be completed at one time
8. The wire arrangement density (speed) can be automatically changed when running different programs. When winding products with multiple taps but different turns and the same wire arrangement angle/requirements, it can be automatically completed
GWLA-0319 Gear Type Medium Speed Toroidal Coil Winding Machine
Equipment model
|
GWLA-0319 |
| Winding mode |
Gear type |
| Finally complete the outside diameter |
60-200 |
| Minimum finished inside diameter |
25 |
| Maximum completion height |
80 |
Wire size |
0.5-1.6 |
| Diameter of magazine |
250 |
| Width of magazine |
3-8 |
| Depth of storage ring |
10/12/16 |
| Maximum speed |
230 RPM |
| Operating voltage |
220V/50HZ |
| Overall dimension |
500x600x750 |
FEATURES:
1.Gear type winding machine has the characteristics of large winding torque, high opening size of tooth ring/wire ring, large storage amount of wire and wide range of suitable winding diameter.
2.It is the most widely used winding machine. It is suitable for products with thick winding diameter, tidy wiring requirements and multi-stranded wire winding, such as small ring transformer secondary winding, high power ring transformer primary winding, large wire diameter inductance magnetic ring, etc.
3.Current transformer coil and adjustable resistance.
4.According to the overall size of the product, complete the internal diameter, turns and other parameters, calculate the length to be wound, choose the appropriate size of the model.
5.The same model can be replaced with different widths of the storage wire ring, in order to meet the different size of the product line storage and complete diameter, a wider range of application.
6.The jig can be adjusted in a wide range, the linear density can be adjusted quickly and the segmented linear density can be adjusted. It is especially suitable for winding transformer products with multiple windings.
7.Suitable for winding wire of various types, such as enamelled copper wire, enamelled aluminum wire, steel wire, nylon wire and resistance wire, can be used for coil processing of various industry products
Related products are as follows:
GWL-0119 Toroid Transformer Winding Machine
Equipment model
|
GWL-0119 |
| Winding mode |
Gear type |
| Finally finished the outside diameter |
80-200 |
| Minimum finished inside diameter |
40 |
| Maximum finished height |
80 |
| Wire diameter |
0.7-2.5 |
| Perimeter of magazine |
300 |
| Width of magazine |
8-25 |
| Maximum speed |
230 RPM |
| Operating voltage |
220V/50HZ |
| Overall dimension |
500x600x750 |
| Weight |
120KG |
Features:
1.Toroid Digital Transformer Winding Machine are advanced,strongly built workhorses capable of winding light as well as heavy wire
without insulation damage.
2.One set standard automatic toroid coil winding include one PCS winding shuttle only,other sizes winding shuttles are optional.
3.The open gap gear rack and hinged gap magazine of Toroid Digital Transformer Winding Machine facilitate core change ,maximizing
output.
4.Accurately wire and tape spacing by adjustable.
5.Toroid Digital Transformer Winding Machine can easily exchangeable magazines secure maximum flexbility.
Advantage:
1.Complete range of articles, large range of wire diameter, Multipurpose
2.Good compatibility, parts are interchangeable
3.High stability, part quality guarantee
4.High production efficiency, no wire breaking at high speed winding
5.Easy to operate, High learnability
GWLT-0318 Transformer core Taping Machine
| Tape width |
8-10-12-15mm(optional) |
Max.winding speed |
230rpm/min |
| Max.final coil.O.D |
80-250mm |
Perimeter Of magazine |
920mm |
| Min.final coil.I.D |
30mm |
Controller storage capacity Programs |
1000set |
| Max.finalcoil height |
110mm |
Mechanical dimensions |
650*500*1200mm |
| Width of magazine |
8-15mm(optional) |
Weight |
108kg |
FEATURES:
1.Tape is loaded onto the magazine and cut automatically,and the winding speed of Transformer core Taping Machine increased in order to finish the job in minimum time.
2.The magazine of automatic tape winding machine may be exchanged in minutes to accommodate different tape widths.
3.Cable taping machine is controlled by gear set to precisely set the depth of tapping.
4.Special relay gear design for quick exchanging of pitch setting gears.
5.To increase the production volume, the main spindle belt is designed to be with lightly weight to reduce heat caused by motor spinning significantly.
ADVANTAGES:
1.High accuracy: stepper motor guarantees high accuracy
2.The cut surface is flat: the hot knife can heat seal the cut surface of the color ribbon and the light and thin textile belt, and the sealing is smooth and free of burrs.
3.The blade is made of imported high-quality steel and has a long service life.
4.Automatic operation: just set the length and number of cuts you need, and the rest of the work is done automatically.
GWL-077 Toroidal Digital Transformer Winding Machine
Equipment model
|
GWL-077 |
| Winding mode |
Gear type |
| Finally complete the outside diameter |
80-200 |
| Minimum finished inside diameter |
40 |
| Maximum completion height |
130 |
| Suitable winding diameter range |
1.0-2.8 |
| Diameter of wire storage ring |
360 |
| Width of magazine |
8-25 |
| Maximum speed |
200 RPM |
| Operating voltage |
220V/50HZ |
| Overall dimension |
500x600x800 |
| Weight |
130KG |
GWL-0519 Advanced long service life digital Transformer Winding Machine
| Wire diameter |
0.7-2.0mm |
Max.winding speed |
200rpm |
| Max.final coil.O.D |
φ60-250mm |
Magazine width |
4-18mm (optional) standard 8mm |
| Min.final coil.I.D |
Φ40 |
Supply voltage |
AC 220V(50Hz) |
| Max.finalcoil height |
90 |
Mechanical dimensions |
650*500*700mm |
| Controller storage capacity Programs |
50*20 set |
Wight |
120kg |
Features:
1. It adopts energy-saving double frequency conversion drive, which saves energy and electricity, and can be adjusted steplessly.
2. Winding tension can be adjusted at any time during standby and winding process.
3. It has the functions of automatic operation, pedal speed regulation operation, and automatic saving function when power is off.
4. It adopts the latest microcomputer full Chinese liquid crystal display controller, which has practical functions such as multi-segment line density adjustment, separate setting of line storage/winding speed, etc.
Advantage:
1.High production efficiency, increase winding efficiency by adjustment of suitable brake tension,
2.Each wiring part guarantee no wire damage.
3.Parts highly optimized and universal for general use, Easy maintenance
4.The technicians are experienced
5.Free replacement of mainframe accessories
Application
Toroidal Winding Machine Application:
Company Profile
Grewin Industrial Group Co., LTD, founded in 1993, is one of China's largesttoroidal winding machine manufacturers.
Widely used in toroidal transformer, current transformer, sensor, inductor manufacturing and other related industries.
Our team always adheres to the concept of serving customers and meeting customer needs, and has won unanimous praise from customers.
Certifications
Our Team with Customers
Packaging & Shipping
Packaging Material: Carton/Wooden case with foam inside.
1.General package(Paper carton or plastic bag): For small euipped parts for ToroidalTransformerWindingMachine
Package it with form and pack paper to guarantee unbroken during the transport.
2.Wooden case package: For larger scale Toroidal Winding machine ,we have special skilled carpenter, who would make the proper wooden case with exact thickness,density,length. The up arrow ↑marked on the outer wooden case. Buffer material would be put in the wooden case to prevent crack and shock.
After -sales service:
PRE-SALE:
1. Strong and professional team of engineers, rich experience
2. Able to provide innovative solutions and quotes in one day
IN SALE:
1. Delivery time: 5-10 days(standard machine), 30 days(custom )
2. Free consulting service: in-depth understanding of customer needs
3. Provide professional advice: including the choice of parts type and consumable parts of the machine.
AFTER-SALE:
1.24 hours free remote service: video guide and telephone
2. Warranty:1 year after-sales service
){kind=link}