Underground Wire Cable Pipe Locator Detector with Transmitter

• Customization: Available
• Certification: CE, RoHS
• Output: Direct Connection Output
• Model NO.: RCI-601P
• Output Frequency: 640Hz-197kHz,Customized
• Output Power: Max. 10W
• Direct Connection Voltage: Max. 150vpp
• HMI: 128X64 LCD
• Power Supply: 4 X Built-in 18650 Li-on Batteries
• Volume: Transmitter 270X220X85mm
• Weight: Transmitter 2.2kgs
• Transport Package: Export Standard Carton with Strong Pallet
• Specification: CE, ROHS
• Trademark: GW
• Origin: Tianjin
• HS Code: 85045000
• Production Capacity: 100000 PCS Per Month

Product Description

 

Product Description
1.Introduction
RCI-601P is a high performance underground metallic pipe locating system.It consists a transmitter and a receiver, can be used to do route tracing, pipe exploration and depth measurement of the underground cables and metallic pipes.It can also be used to identify target cable from a bunch of cables,locate the pipe insulation damage and part type cable fault.                                     

2.Product Pictures
 

 

 Underground Pipe Locator underground cable tracer Tdr Cable Fault Locator Cable Fault Prelocator sheath fault Cable Fault Locating tester for Cable faults

Product Description: li-ion batteries built-in storage download atas I Cable Fault pre Locator

1. GENERAL DESCRIPTION
    
   1. The PCLC-906D Power Cable Fault locator is an easy operation device used for distance locating . It's easy to operate,support both touch screen/button operation and with friendly interface. Low voltage pulse mode (TDR ) can be used independently; In impulse current mode (ICM), it needs to be used with HVSG-500GN series high voltage signal generator; In the multiple impulse mode(MIM) must also be tested with PCLC-900C cable multiple impulse filter coordination; After the distance measurement is completed, the PCLD-904P series digital multifunctional cable fault pin-pointer shall be used for accurate point pinpointing. Together, they form a high-performance cable fault finding system that offers a variety of innovative features.
   2. SPECIFICATION:

No	Cable Fault	Representation	Testing method
1	Low resistance /short circuit fault	Tramegger value :0 Multimeter value:< 200Ω	Low Voltage Impulse method
2	Break fault	Conductor disconnection	Low Voltage Impulse method
3	High resistance fault	Tramegger :0 Or: Tramegger :0 Multimeter:≥200Ω	Impulse current method or Multiple impulse method
4	Flashover fault	Megohm meter measurement: normal insulation level Voltage withstand test: failed

Main menu	Sub-menu
Mode	The working mode is automatically identified by the access cable. There is no sub- menu in the mode.
Range	25m,50m,100m,200m,400m,800m,1.5km,3km,6km,12km,25km,50km,100km
VOP	Cross-linked cable, oil-immersed paper, plastic cable, rubber cable, wave speed increase, wave speed reduction
Scale	Full extent, zoom in, zoom in, Max
Copy /both	Zone 1 temporary storage, ZONE 2 temporary storage, zone 3 temporary storage, Zone 1 both, ZONE 2 both, zone 3 both
Docu.	Docu., internal ,USB, I ->U disk, recall
Operate	Location,Auto test, Screen setting, Screen correction

Below is old type:PCLC-901D and also can produce if you're interesting in this model. 




         

 3.FUNCTION FEATHER:

• Multiple distance locating method:
  -Low current impulse method: apply to the locating of the low resistance fault. Short circuit fault, open circuit fault. It also can be used in the measurement of the cable length, the intermediate joints, T joints, and cable termination joint. This method also can be used to correct the wave velocity.
  -Impulse current method: apply to the high resistance fault, breakdown fault. Use the current coupler to gather signal from the earth wire  
  -Multiple impulse method: improvement of the SIM method
• 200MHz real-time sampling
  -Advance tech.Upgrading for SIM method
  -Max. 0.4m measurement resolution,PCLC-901D has small blind zone and is special for the short cable and nearly-terminal fault cable
• Touch screen and press key operation
  -Touch operating screen with smart gesture operation
  -Support cursor drag-drop function and double-click function,easy to locate
  -Simple function menus with high performance.
• Big color LED screen, friendly interface
  -Simple function menus with high performance
• 7" LED screen,160°viewing angle,bright with 750cd/m2 to view under sunshine
  -PIP copy(pic. temporary storage). There'll be a main window and three temporary storage windows could check three waveform together.
• Waveform storage and PC communication
  -Special software management for software upgrade, backup and restore in device.
  -Waveform storage and communication with computer.
  -Internal storage of waveform.
  -Optional mini printer for waveform printing
  -Support connection with PC or laptop
• Power management
  -Back light weakens if no operation in 2 min and power off in 10 min. if no operation. 
  -Built-in Polymer Lithium-ion battery. 
  -Working time could reach 7 hours for each use.

Product Description
1.Introduction

Usage:	Application:
Route tracing Depth measurement Construction pipeline survey	Cable (live and dead cable) Metallic pipeline Nonmetallic pipeline

2.Product Pictures

                                                    
3.Function features:
Color compass display:Underground pipelines penetration,infra-field multiple underground pipelines display
Real-time tracing correct/error indication to suppress interference from the nearby pipelines
Enhanced precision depth measurement: real-time depth measurement
Depth measurement auxiliary sensor: interference indication
Enhanced passive detection: Multiple pipelines can be displayed simultaneously
High performance transmitting clamp: running cable coupling signal transmitting
Flexible clamp unique identification: convenient and highly reliable
High power digital amplifier transmission, automatic impedance matching, automatic protection
High sensitivity, 2Hz ultra-low bandwidth receiving, high anti-interference
Transmitting and receiving all digital process,stable and reliable
IP65

Optional extension function modules:

L1/L5 high-precision GPS module: positioning, distance measurement
Internal storage module: 256 pieces of detection data can be stored

Bluetooth communication module: upload detection data to the host station.

Magnetic filed detection mode:PCM method erosion resistant coating broken detection

Optional accessories:

Depth measurement auxiliary sensor: interference indication during depth measurement

Output booster and A frame: pinpoint the pipeline broken points

Output sonde:signal transmitting used for nonmetallic pipeline route tracing

4.SPECIFICATION

Transmitter		Receiver
Output	Direct Connection output, Clamp Coupling Output (optional), Radiation output, fault location booster (optional)	Receiving mode	Built-in coil,Built-in magnetic filed sensor Flexible clamp,Sensor,A frame
Output Frequency	640Hz (complex frequency), 1280Hz (complexfrequency), 8kHz,33kHz,82kHz,197kHz	Receiving frequency	Active frequency: 640Hz,1280Hz,8kHz,33kHz,82kHz,197kHz Power frequency: 50Hz/60Hz,4-24kHz Radiation frequency
Output power	15Wmax,10 levers adjustable	Pipe detection mode	wide peak method, narrow peak method, valley method, history curve, frequency spectrum
Over voltage ,over current protection	auto	Cable identification mode	flexible Clamp (optional) intelligent identification and sensor (optional) identification
HMI	320x240 Black and white LCD	HMI	320X240 LCD color LCD,clear under sunshine
Power supply	4 X built-in 18650 Li-on batteries, standard 7.4V, >6AH	Built-in battery	2 X 18650 Li-on batteries, standard 7.4V,>3AH
Volume	280x220x90mm	Volume	680x120x277mm
Charger	DC8.4V,2A	Charger	AC 100~240V,50/60Hz
Temperature	-10-40ºC,humidity 5-90%,elevation <4500m

 CABLE FAULT PINPOINTER:PCLD-904P HIGH VOLTAGE SIGNAL GENERATOR :HVSG-500GN  
Company introduction:

1.certification
We have passed ISO9001:2015,CE,SGS approval and IEC report

 


                                                    
3.Function features:
Compass display: to display pipe position directly.
Left/right arrow indication: use the left/right arrow to indicate the pipe position when route tracing.
Right/wrong indication: real-time test the pipe current direction to indicate tracing result and avoid the nearby lines interference.
Real-time depth measure and current measure.
History curve display: to display the signal variation directly.
Cable Identification: Clamp (optional) identification and sensor identification. Clamp identification can precisely gives accurate result. sensor (optional) identification could be used when the Clamp identification is not applicable.
Grounding fault location: Use the A frame (optional) to pinpoint the pipe insulation damaged points against the ground. No need to do zero set and the arrow will point to the fault point direction.
Digitization high accuracy sampling and processing,narrow receiving pass band to rise the anti-interference capability and suppress power interference and harmonic interference from nearby running cable and pipe.
Multiple locating frequency: active detection and passive detection.
Multiple signal output mode: Direct connection output, Clamp Coupling input, Radiation output.
Big capacity Li-on batteries series,support auto power off when low battery or long time no operation
Solid case and light weight easy to carry
4.SPECIFICATION
 Transmitter:
Output: Direct Connection output, Clamp Coupling Output (optional), Radiation output. 
Output Frequency:
640Hz (complex frequency), 1280Hz (complex frequency), 10kHz, 33kHz, 83kHz.
Output power: max. 10W, 10 levels adjustable, auto impedance matching.
Direct connection voltage: max. 150Vpp.
Overload and short circuit protection.
HMI: 128X64 LCD.
Power supply: 4 X built-in 18650 Li-on batteries, standard 7.4V, 6.8Ah. 
 Receiver:
Input: Internal receiving loop, Clamp (optional), sensor (optional),fault locating A Frame (optional).
Receiving frequency: 
      - Active frequency: 640Hz,1280Hz,10kHz,33kHz,83kHz
      - Power frequency: 50Hz/60Hz,250Hz/300Hz
      - Radiation frequency passive frequency: center frequency 10kHz, 33kHz, 83kHz  
Pipe detection mode: wide peak method,narrow peak method,valley method
Cable identification mode: Receiving Clamp (optional) intelligent identification and sensor (optional) identification
HMI: 320X240 LCD
Built-in battery: 2 X 18650 Li-on batteries, standard 7.4V,3.4Ah
Other:
Volume: transmitter 270x220x85mm,receiver 700x270x120mm
Weight: transmitter 2.2kgs, receiver 2.2kgs 
Charger: input AC 100~240V,50/60Hz,output DC8.4V,2A
Temperature: -10-40ºC,humidity 5-90%,elevation <4500m

Company introduction

1.certification
We have passed ISO9001:2015,CE,SGS approval and IEC report



2.Company profile
     Tianjin Grewin is concentrating on transformers for 20 Years and complianted by ISO9001:2015,CB,IEC CB,CE etc.We're always pay great attention to its business philosophy "Quality and Honesty First".Grewin is specialized in the design and manufacture of wound components such as transformer,current sensors, chokes etc .windely used in communications,electronics,meters,industrial control,medical equipments and other fields.We are also a provider of power meters and instruments locators. 85% of its products exported to America, Europe, and Asia etc.We sincerely invite you to join us to create a bright future.

3.Terms of Shipment:
Within 10 working days after received related prepayment or L/C.

4.Payment terms:
(1)T/T 100% or 50% deposit by T/T in advance, balance amount to be paid 7 days before
delivery.
(2) By irrevocable L/C at sight, to be issued immediately against confirmed order.
(3)Payment by T/T, if order amount is less than USD 20,000.

5.Warranty:
(1)We provide 1 year warranty.
(2)If the product is defective, please notify us within 3 days of delivery.
(3)All products must be returned on their original condition, in order to qualify for a refund or exchange of goods

6.Why choose us?
Quality and honest first!
A. Flexible service for diffierent transformers with high efficiency performance.
B. Over 40 years experience of transformer designing and producing.
C.100% test of every single product we produce from incoming material checking.
D. UL, CE, ISO9001:2008
E. We offer custom-made transformers, OEM and ODM are welcome
F. We deliver the quality you expect at consistently competitive prices
G.Transformer quality lifetime:10 Years.
H.Specialty Sales service:5 -10 Years

7.Flow chart of trading activities:

NO	Step	Days need
1	Request for quotation	1 day
2	Making quotations	1 day
3	Offer and counter offer	3 days
4	Sending and receiving samples	3-10 days
5	Sample confirmation	3 days
6	Placing a firm order	1 day
7	Paying and receiving the down payment	1-4 day
8	Factory production & Quality inspection	15-20 days
9	Paying and receiving the balance	4 days
10	Delivery of goods	1 days

8.contact
Tianjin Grewin Technology Co.,Ltd. 
 
Web:transformer.en.made-in-china.com 
Address: 2# MeiNian Plaza No.16 DongTing Road,Hexi Distr,300222,Tianjin China.