Product Description
GWPLC-55
Copper Wire Flat Wire Vertical Air Coil Fully Automatic
Winding Mahcine for Flat Coil Inductors
Fully Automatic
Winding Mahcine specification:
| Name:Flat wire vertical winding machine |
Modle: |
| Unfolded working size Length * Width * Height |
3000*1000*1600 |
| Machinable section |
<10 square millimeter |
| Machine weight |
550KG |
| The largest aspect ratio |
less than 20 times (wire width divided by thickness) |
| Input voltage |
single phase 220V |
| Minimum wire thickness |
greater than 0.1mm |
| Rated power |
2.9KW |
| Maximum wire thickness |
less than 2mm |
| Operating pressure |
0.6≤P≤1.0MPa |
COPPER WIRE FLAT WIRE SYSTEM CONFIGURATION:
| No. |
Product Name Specification |
Brand |
Model Specifications |
Quantity |
Remark |
| 1 |
Machine Body |
Grewin |
|
1 SET |
|
2 |
Servo Motor |
DELTA |
0.9KW |
1 SET |
X Axis |
| 3 |
|
DELTA |
1.0kW |
1 SET |
Y Axis |
| 4 |
|
DELTA |
1.0kw |
1 SET |
Z Axis |
| 5 |
Computer Controller |
YONGHENG |
Controller |
1 SET |
8 Inch Screen |
| 6 |
The Electromagnetic Valve |
AIRTAC |
210-08 |
4 SET |
|
GWPC-870 SQUC automatic flat copper wire vertical winding machine
The equipment adopts universal automatic blanking.
Wire winding error alarm, wire blocking alarm.
Dual-shaft high-power pay-off: maximum load 13 kg/shaft.
Wire diameter applicable range 0.1-0.6mm, thickness, and width 0.6-2.0mm.
Automatic universal blanking structure
Electric voltage:220V
Power rate:800W-1000W
The machine size:1500×1000×1200mm
The production capacity: about 800-1000 / hour, special machine type is 1500 / hour
Equipment weight:180KG
The product defect rate is less than 3 parts per thousand.
Man-machine interface, fault automatic prompt, and troubleshooting in less than 5 minutes.
Dummy module moulding design, no need to change the machine debugging, switching the machine within 30 minutes to complete.
The symmetry of both sides of the product produced is good, and the circle diameter can be controlled within 0.02mm of the error.
The single-head line change time is effectively controlled within 5 minutes (the two-axis line change time is about 10 minutes) the operator can complete the line change and correction
Change the type of machine.
Equipment maintenance is convenient, the operator can complete the usual maintenance and maintenance of the equipment, ultra-low consumption cost (equipment consumption can be recycled repeatedly
Use).
A program and equipment split design can effectively avoid equipment 24-hour operation overload caused by machine failure maintenance.
The transmission power adopts 8-axis simultaneous double combination imported servo motor transmission power precision feed step compensation structure design (corresponding thrust is equal to 16 axes
Motor output.
Remark 1
Optional configuration: automatic feeding, material does not grab alarm function, material does not meet the standard alarm function, material error alarm function.
GWX-740 Automatic flat copper wire edge winding machine
1. Winding error alarm and line blocking alarm.
2. Dual-axis high-power pay-off device: maximum load capacity 100 kg/axis.
3. The applicable range of wire diameter is within 20mm 2
4. Automatic universal download structure.
5. Automatic feeding mechanism: fully automatic feeding, alarm function for materials not grasped, alarm function for materials not meeting standards, and alarm function for material errors.
6. Use air pressure 0.6Mpa
| Electric voltage : |
220V/50Hz |
| Power rate: |
1300W |
| The machine size: |
2500×700×1650mm |
| Equipment weight : |
300KG |
1. The defective rate of products is less than three thousandths.
2. Human-machine interface, automatic fault prompts, and troubleshooting takes less than 5 minutes.
3. Fool-like modular molding design, no debugging is required when changing models, and the switch can be completed within 30 minutes.
4. The single-head line changing time is effectively controlled within 5 minutes, (the simultaneous line changing time of two axes is about 10 minutes) and the operator can complete the line changing and change the machine model.
5. The equipment is easy to maintain, and the operator can complete daily maintenance and upkeep of the equipment, with ultra-low consumption costs (equipment consumables can be recycled and reused).
6. The separate design of the program and equipment can effectively avoid the maintenance of machine failures caused by overload operation of the equipment 24 hours a day.
7. The transmission power adopts 8-axis simultaneous dual-combined imported servo motor transmission power and precision delivery step compensation structure design (the corresponding thrust is equal to the output of 16-axis motors).
GWQ-750 Flat copper wire vertical winding machine
(1) The modular design of the whole machine is convenient to change the type of machine
(2) Multi-level logic calculation of the number of laps 99.99% yield
(3) Winding error alarm. Circumference bad alarm, blocked wire alarm
(4) Two sets of dual-axis high-power pay-off: maximum load of 13 kg/axis
(5) Line diameter application range 0.1-0.3mm thickness, width 0.6-1.5mm
(6) Automatic feeding, material does not grab alarm function, material does not meet the standard alarm function, material error alarm function
(7) Air pressure: greater than 0.7Mpa
(1) Electric voltage 220V
(2) The maximum work rate is 4500W and the fixed work rate is 2500W
(3) The body size of 6000×2300×2200mm will be changed without notice according to the latest standard
(4) The production capacity is about 1200-1500 / hour
(5) Equipment weight 1800KG
(1) The product defect rate is less than 3 ‰.
(2) Man-machine control interface to check the fault, troubleshooting less than 1-3 minutes.
(3) Dummy module molding design, no need to change the machine type debugging, switching machine type within 30 minutes to complete.
(4) The symmetry of both sides of the product produced is good, and the error of the circle diameter can be controlled within 0.02mm.
(5) The symmetrical synchronous design is adopted, and the single head wire change time is effectively controlled within 5 minutes, and the ordinary staff can complete the wire change and change the machine type
(6) Equipment maintenance is convenient, ordinary staff can complete the usual maintenance and maintenance of equipment, ultra-low consumption cost (equipment consumables can be recycled and reused).
(7) Program and equipment split design, can effectively avoid equipment 24 hours operation overload operation caused by machine failure maintenance.
(8) The transmission power adopts the 8 axis simultaneous double combination imported servo motor transmission power precision file step compensation structure design (the corresponding thrust is equal to the output of 16 axis motor).
GWPLC-880A Automatic Winding Machine
SPECIFICATION:
1.Compatible wire diameter :Small machine 0-12 square/Large machine10-50 square.
2. The whole set of control system is Open CNC System.
3. The replacement jig can be compatible with multiple models.
4. Pneumatic components use AirTAC or the same level;
5. The overall equipment meets the safety production requirements.
6.The length of the equipment host is 1000, the width is 700, the height is 1600, and the space occupied by the discharge rack is 1500, and the width is 700. The whole machine occupies a space of 2500*700 units MM. The overall weight of the equipment is 300KG.
Equipment Module - Equipment Description:
| Power supply |
Taiwan or domestic first-line |
Pneumatic components |
Air TAC or equivalent |
| Module |
Baichuan Precision |
Control system |
Open CNC System |
| Working voltage |
220V/50HZ |
Power |
1300W |
ADVANTAGES:
Complete range of articles, large range of wire diameter, Multipurpose.
Good compatibility, parts are interchangeable.
High stability, part quality guarantee.
High production efficiency, no wire breaking at high speed winding.
Easy to operate, High learnability.
Enquiries can be quoted one day service.
Automatic Winding Machine has Complete specifications and data.
GWPC-860 automatic flat copper wire vertical winding machine
(1) The equipment adopts universal automatic blanking.
(2) Winding error alarm, blocking alarm.
(3) Dual-shaft high-power pay-off: maximum load of 30 kg/shaft.
(4) Flat line diameter application range: 0.15-1.5mm thickness, width 1.0-4.0mm circular line diameter application range :0.5-2.2mm.
(5) Automatic universal blanking structure.
(6) Four wire ends can be produced
Electric voltage 220V
Power rate 650-1000W
The body size is 2700×1600×1500mm
The production capacity is about 800-1200 / hour
Equipment weight 180KG
(1) The product defect rate is less than 3 ‰.
(2) Man-machine interface, fault automatic prompt, troubleshooting less than 5 minutes.
(3) Dummy module molding design, no need to change the machine type debugging, switching machine type within 30 minutes to complete.
(4) The symmetry of both sides of the product produced is good, and the error of the circle diameter can be controlled within 0.02mm.
(5) The single head line change time is effectively controlled within 5 minutes,(the two-axis line change time is about 10 minutes) the operator can complete the line change and change the machine type.
(6) Equipment maintenance is easy, the operator can complete the usual maintenance and maintenance of the equipment, ultra-low consumption cost (equipment consumption can be recycled and reused).
(7) Program and equipment split design, can effectively avoid equipment 24 hours operation overload operation caused by machine failure maintenance.
(8) The transmission power adopts the 8 axis simultaneous double combination imported servo motor transmission power precision file step compensation structure design (the corresponding thrust is equal to the output of 16 axis motor).
GWPC-850 automatic flat copper wire vertical winding
GWPC-670 Vehicle-mounted fully automatic flat copper wire vertical winding machine
1. The device uses universal automatic feeding.
2. Whenever the winding of the police, block the line to the police.
3. Double -axis high -power storage device: maximum weight of 60 kg/axis.
4. The scope of the wire diameter is 0.2-2.0mm thick, and the width is 1-5mm, round wire:0.8-2.8mm
5. Automatic universal unloading structure.
6. Automatic material: fully automatic material supply, the material does not grab the alarm function, the material does not meet the standard replacement function, and the material error alarm function.
7. Use the air pressure 0.6MPa.
8. Dual system can switch arbitrarily
GWE-760 Flat copper wire vertical winding machine
(1) The modular design of the whole machine is convenient to change the type of machine
(2) Multi-level logic calculation of the number of laps 99.99% yield
(3) Winding error alarm. Circumference bad alarm, blocked wire alarm
(4) Two sets of dual-axis high-power pay-off: maximum load of 13 kg/axis
(5) Line diameter application range 0.1-0.3mm thickness, width 0.6-1.5mm
(6) Automatic feeding, material does not grab alarm function, material does not meet the standard alarm function, material error alarm function
(7) Air pressure: greater than 0.7Mpa
(1) Electric voltage 220V
(2) Work rate Maximum work rate 5000W Maximum work rate 3000W
(3) Body size 6000×2300×2200mm is subject to change without prior notice according to the latest standard
(4) The production capacity is about 1200-1500 / hour
(5) Equipment weight 1800KG
(1) The product defect rate is less than 3 ‰.
(2) Man-machine control interface to check the fault, troubleshooting less than 1-3 minutes.
(3) Dummy module molding design, no need to change the machine type debugging, switching machine type within 30 minutes to complete.
(4) The symmetry of both sides of the product produced is good, and the error of the circle diameter can be controlled within 0.02mm.
(5) The symmetrical synchronous design is adopted, and the single head wire change time is effectively controlled within 5 minutes, and the ordinary staff can complete the wire change and change the machine type
(6) Equipment maintenance is convenient, ordinary staff can complete the usual maintenance and maintenance of equipment, ultra-low consumption cost (equipment consumables can be recycled and reused).
(7) Program and equipment split design, can effectively avoid equipment 24 hours operation overload operation caused by machine failure maintenance.
(8) The transmission power adopts the 8 axis simultaneous double combination imported servo motor transmission power precision file step compensation structure design (the corresponding thrust is equal to the output of 16 axis motor).
Company Profile
Grewin Industrial Group Co., Ltd. was founded in 1993 to provide cost-effective, high-quality manufacturing solutions for transformer industries.
Whether producing transformers, chokes,magnetics or other vital components,our winding machine are relied upon by countless manufacturers around the world.
1. Can produce different size coil:Toroidal winding machine can select different magazine to complete various sizes of transformer coils.
2. High precision and efficiency: Because the correct winding of the coil can greatly affect the performance and life of the electronic device.
3. Technical Support: Grewin can provide cost-effective winding machines to meet the needs of different customers, and provide them with products and technical support.
So whether you are a manufacturer of transformers, chokes or other winding components, Grewin's winding machine are a wise choice. With their precision, flexibility and affordability, they can help you meet your production goals while ensuring the quality of the finished product.
After Sales Service
PRE-SALE:
1. Strong and professional team of engineers, rich experience
2. Able to provide innovative solutions and quotes in one day.
IN SALE:
1. Delivery time: 5-10 days(standard machine), 30 days(custom)
2. Free consulting service: in-depth understanding of customer needs
3. Provide professional advice: including the choice of parts type and consumable parts of the machine.
AFTER-SALE:
1.24 hours free remote service: video guide and telephone
2. Warranty:1 year after-sales service
Our Team with Customer
Packaging & Shipping
GREWIN INDUSTRIAL GROUP CO.,LTD
Add: 2#MeiNian Plaza No.16 DongTing Road,Hexi Distrct | Tianjin | 300040 | China
Audited Supplier 
){kind=link}