Product Description
GWL-615 Multi-Size Toroidal Transformer Winding Machine for Electronic Components
SPECIFICATION:Main technical parameters table: (Unit: mm)
Equipment model
|
GWL-615 |
| Winding mode |
Slider type |
| Finally complete the outside diameter |
35-90mm |
| Minimum finished inside diameter |
22mm |
| Maximum completion height |
30mm |
| Suitable winding diameter range |
0.15-0.5mm
|
| Perimeter of magazine |
630mm |
| Width of magazine |
3-6mm |
| Maximum speed |
700 RPM |
| Operating voltage |
220V/50HZ |
| Overall dimension |
650*500*650mm |
| Weight |
110KG |
FEATURES:
1. It adopts the side-sliding winding method, which is suitable for winding products with thin wire diameter and many turns, such as the primary coil of the transformer, the coil of the small mutual inductor, etc. It has the advantages of high winding speed, and is not easy to scratch the paint or break the wire.
2. Suitable for winding wires of various types, such as enameled copper wire, enameled aluminum wire, steel wire, heating wire, etc., suitable for coil processing of products in various industries
3. The machine head uses synchronous belt drive, which has the characteristics of low running noise, long life and maintenance-free
4. The wire storage ring is driven by a soft rubber wheel, which is not easy to slip and does not wear the wire storage ring, making the equipment more durable
5. The maximum winding speed can be set according to the wire diameter
6. Automatically rotate the wire arrangement function when arranging the wire. When making transformer products with more turns, the lead position is reserved
7. The maximum speed of wire storage and winding can be adjusted separately. When winding small wire diameter products, the winding speed cannot be too fast, which significantly improves production efficiency
8. Multiple wire storage and multiple winding can be set. For products with more turns that cannot be stored enough at one time, the winding can be completed at one time
9. The wire arrangement density (speed) can be automatically changed when running different programs. When winding products with multiple taps but different turns and the same wire arrangement angle/requirements, it can be automatically completed
WINDING MACHINE
GWL-6200 Slider type toroidal transformer coil winding machine
Equipment model
|
GWL-6200 |
| Winding mode |
Gear type |
| Finally complete the outside diameter |
60-120 |
| Minimum finished inside diameter |
35 |
| Maximum completion height |
80 |
| Suitable winding diameter range |
0.2-0.7 |
| Diameter of wire storage ring |
195 |
| Width of storage ring |
9-12 |
| Maximum speed |
800 RPM |
| Operating voltage |
220V/50HZ |
| Overall dimension |
500x600x700 |
| Weight |
90KG |
GWL-5200 Slider type high speed coil winding machine for toroidal transformer
| Wire diameter |
0.15-0.7 |
Max.winding speed |
800rpm |
| Max.final coil.O.D |
φ60/120 |
Magazine Diameter |
195 |
| Min.final coil.I.D |
Φ30 |
Supply voltage |
AC 220V(50Hz) |
| Max.finalcoil height |
80 |
Mechanical dimensions |
500×600×700 |
| Magazine width |
3-6 |
Weight |
90kg |
GWLA-0319 Gear type middle speed copper wire toroidal coil winder
Equipment model
|
GWLA-0319 |
| Winding mode |
Gear type |
| Finally complete the outside diameter |
60-200 |
| Minimum finished inside diameter |
25 |
| Maximum completion height |
80 |
Wire size |
0.5-1.6 |
| Diameter of magazine |
250 |
| Width of magazine |
3-8 |
| Depth of storage ring |
10/12/16 |
| Maximum speed |
230 RPM |
| Operating voltage |
220V/50HZ |
| Overall dimension |
500x600x750 |
GWL-0519 Gear type Current Transformer Winding Machine
| Wire diameter |
0.7-2.0mm |
Max.winding speed |
200rpm |
| Max.final coil.O.D |
φ60-250mm |
Magazine width |
4-18mm (optional) standard 8mm |
| Min.final coil.I.D |
Φ40 |
Supply voltage |
AC 220V(50Hz) |
| Max.finalcoil height |
90 |
Mechanical dimensions |
650*500*700mm |
| Controller storage capacity Programs |
50*20 set |
Wight |
120kg |
GWL-815 Gear type high quality coil winding machine for toroidal transformer
| Wire diameter |
0.3-1.6mm |
Max.winding speed |
300rpm |
| Max.final coil.O.D |
Φ50-200mm |
Magazine width |
3-10mm (optional) |
| Min.final coil.I.D |
Φ20mm |
Supply voltage |
AC 220V(50Hz) |
| Max.final coil height |
60mm |
Mechanical dimensions |
650*500*700mm |
| Controller storage capacity Programs |
50*20 set |
Wight |
100kg |
GWL-0619 Big gear high stability floor type winding machine for inductor
Equipment model
|
GWL-0619 |
| Winding mode |
Gear type |
| Max.Final outer diameter |
130-450 |
| Mini final inside diameter |
70 |
| Max Final height |
220 |
| Wire diameter |
1.0-4.0 |
| Perimeter of magazine |
1200 |
| Width of magazine |
10-30(Optional) |
| Max winding speed |
120 rpm/min
|
GWLJ-0519 Gear type Rectangle transformer coil winding machine
| Wire size |
0.7-2.0mm(Single enamelled copper wire, multi-wire winding, the combined strength does not exceed the maximum value) |
| Finish the outer length/width |
60-300mm (Please note: 60-300mm does not mean such a wide range directly, but refers to adjustment by adjusting some installed parts. If the maximum 300mm is selected, products smaller than 150mm cannot be processed; on the contrary, if the product is selected to be suitable for small products, it cannot be processed. Products larger than 150mm.) |
| Minimum the inner length/width |
45mm(Length is greater than 45mm Width is greater than 45mm) |
| Maximum finished height |
60mm |
| Magazine width |
4-18mm(Optional)Standard configuration (8mm) |
| Magazine perimeter |
720mm |
| Max winding speed |
250rpm/min |
| Controller storage capacity Programs |
50*20set (1000 running programs) |
| Weight |
120KG |
| Dimension |
650*500*700mm |
GWLA-0319F Gear type Rectangle transformer coil winding machine
| Wire size |
0.5-1.6mm(Single enamelled copper wire, multi-wire winding, the combined strength does not exceed the maximum value) |
| Finish the outer length/width |
60-300mm |
| Minimum the inner length/width |
45mm |
| Maximum finished height |
60mm |
| Magazine width |
4-18mm(Optional)Standard configuration (8mm) |
| Magazine perimeter |
720mm |
| Max winding speed |
250rpm/min |
| Controller storage capacity Programs |
50*20set (1000 running programs) |
| Weight |
120KG |
| Dimension |
650*500*700mm |
TAPING MACHINE
GWL-500T Toroidal taping wrapping machine with film
| Suitable winding band width |
10-12-15-20mm |
| Finally completed outer diameter |
80-250mm |
| Minimum finished inner diameter |
40mm (with 10mm storage ring installed) |
| Maximum finished height |
130mm |
| Width of magazine |
10-20mm (optional) |
| Magazine circumference |
1070mm |
| Maximum winding speed |
230 rpm |
| Presetable programs |
50*20 groups (1000 running programs) |
| Overall machine weight |
100kg |
GWL-500F High stability floor type toroidal wrapping machine for transformer
| Suitable winding band width |
10-12-15-20mm |
| Finally completed outer diameter |
120-320mm |
| Minimum finished inner diameter |
40mm (with 10mm storage ring installed) |
| Maximum finished height |
130mm |
| Width of magazine |
10-20mm (optional) |
| Magazine circumference |
1070mm |
| Maximum winding speed |
230 rpm |
| Presetable programs |
50*20 groups (1000 running programs) |
| Overall machine weight |
138kg |
GWTMLJ-0218 Gear type Rectangle transformer coil tapping machine
| Tape width |
8mm/10mm/12mm/15mm/20mm(optional) |
| Finish the outer length/width |
60-300mm (Please note: 60-300mm does not mean such a wide range directly, but refers to adjustment by adjusting some installed parts. If the maximum 300mm is selected, products smaller than 150mm cannot be processed; on the contrary, if the product is selected to be suitable for small products, it cannot be processed. Products larger than 150mm.) |
| Minimum the inner length/width |
45mm(Length is greater than 45mm Width is greater than 45mm) |
| Maximum finished height |
60mm |
| Tape Magazine width |
8mm/10mm/12mm/15mm/20mm(optional) |
| Magazine perimeter |
720mm |
| Max winding speed |
250rpm/min |
| Controller storage capacity Programs |
50*20set (1000 running programs) |
| Weight |
120KG |
| Dimension |
650*500*700mm |
GWLT-850 Toroidal tape wrapping wind machine with insulation film
| Tape width |
8-10-12-15mm(optional) |
Max.winding speed |
260rpm/min |
| Max.final coil.O.D |
60-180mm |
Perimeter Of magazine |
760mm |
| Min.final coil.I.D |
30mm |
Controller storage capacity Programs |
1000set |
| Max.finalcoil height |
80mm |
Machine dimensions |
650*500*1160mm |
| Width of magazine |
8-10-12mm(optional) |
Weight |
95kg |
GW-80T PLC Toroidal Transformer Taping Machine
| Tape width |
9-25mm |
| Minimum finish inner diameter |
29mm |
| Maximum completion height |
90mm |
| Maximum finish outer diameter |
40-150mm |
| Max speed |
150rpm |
| Tape Magazine diameter |
241mm |
GWMN-400B Toroidal sticky taping machine
| Machine head complete parameters |
GWMN-400B |
| Tape width range |
4-8MM |
| Tape ring inner diameter |
170MM |
| The maximum finished outer diameter |
70MM |
| Minimum finished inside diameter |
12.5MM |
| Maximum Finished Height |
20MM |
| Maximum speed |
650 |
GWB-50T Belt-type Thick Diameter Toroidal Winding Machine
| Wire diameter: |
0.5-1.8mm |
| Magazine inner diameter: |
210mm |
| Finished Max O.D. : |
35-150mm |
| Finished Min I.D. : |
11mm |
| Finished Max height: |
60mm |
| Max winding speed: |
800rpm (0.5-1.0mm) 600rpm (1.1-1.8mm) |
GWV10-PLC Automatic Micro Toroidal Winding Machine
| Wire size |
0.05-0.32mm |
| Minimum finish inner diameter |
1.8mm |
| Maximum completion height |
10mm |
| Maximum finish outer diameter |
5-14mm |
| Max speed |
1500rpm |
| Magazine inner diameter |
60mm |
GW-29T Toroidal Transformer winding machine
| Wire size |
0.2-1.6mm |
| Minimum finish inner diameter |
17mm |
| Maximum completion height |
70mm |
| Maximum finish outer diameter |
50-150mm |
| Max speed |
240rpm |
| Tape Magazine diameter |
210mm |
GW-40T Slider toroidal transformer winding machine
| Wire diameter |
0.1-1.0mm |
| Minimum finish inner diameter |
10mm |
| Maximum completion height |
80mm |
| Maximum finish outer diameter |
25-150mm |
| Max speed |
1500rpm |
| Magazine diameter |
150mm |
Application
Company Profile
Founded in 1993, Grewin has provided cost-effective, high-quality manufacturing solutions to a variety of industries. Whether it is the production of high-frequency transformers winding, low-frequency transformers winding, inductors winding and other coils winding , or other vital components, our winding machines have been relied upon by countless manufacturers around the world.
Our Team with Customers
Certifications
Packaging & Shipping
After Sales Service
PRE-SALE:
1. Strong and professional team of engineers, rich experience
2. Able to provide innovative solutions and quotes in one day
IN SALE:
1. Delivery time: 5-10 days(standard machine), 30 days(custom )
2. Free consulting service: in-depth understanding of customer needs
3. Provide professional advice: including the choice of parts type and consumable parts of the machine.
AFTER-SALE:
1.24 hours free remote service: video guide and telephone
2. Warranty:1 year after-sales service
Audited Supplier 
){kind=link}